Search found 81 matches
- Wed Nov 12, 2008 8:06 pm
- Forum: Engine
- Topic: Holley carb
- Replies: 31
- Views: 22243
Re: Holley carb
If it has an air horn the list number for the carb is there and you can go through the Holley catalog / online and bounce the parts list against what you have. If it is a "street" Holley it would more than likely be a version of a 3310 I think.
- Wed Nov 12, 2008 7:56 pm
- Forum: General BS
- Topic: Going on a diet!
- Replies: 29
- Views: 17619
Re: Going on a diet!
Any plans for "glass" parts? Was suprised what we lost with a "plastic" nose and no inner fender wells!
- Wed Nov 12, 2008 7:50 pm
- Forum: Chassis and Suspension
- Topic: Baffled engineering strikes again!
- Replies: 2
- Views: 3064
Re: Baffled engineering strikes again!
Car is about 3000 lbs' with me when my buddy drives ( We share the fun) about 35lbs' lighter (skinny old guy) the springs are 95lbs and scaled about 56% front 44%rear (if memory is correct). Moroso trick fronts and 90/10 shocks. The springs are in the range of the front end weight. Used to have a 10...
- Wed Nov 12, 2008 3:14 pm
- Forum: Chassis and Suspension
- Topic: Baffled engineering strikes again!
- Replies: 2
- Views: 3064
Baffled engineering strikes again!
Hi! Been awhile, Have a new 8" converter in the '64 GTO :D Leaves much better! Blows the 9" off :( Lowered pressure and hooks better :D Down track gets a bit loose! :shock: Car usually goes straight as an arrow :D Shocks are QA1 coil overs single adjustables. Think maybe set to soft for th...
- Thu Jul 24, 2008 10:00 pm
- Forum: General BS
- Topic: New VFN hood
- Replies: 9
- Views: 6812
Re: New VFN hood
We have a vfn nose, doors, trunk lid, and back bumper. Only complaints are 1 door had the inner laminated a bit off, pain in backside to fit in jamb, trunklid front corners bow up a bit. Thought quality was ok and cost fair. Just my 2 cents! Good luck with it.
- Thu Jul 24, 2008 9:44 pm
- Forum: Chassis and Suspension
- Topic: Feedback on hook
- Replies: 6
- Views: 5629
Re: Feedback on hook
Thanks, We have been chasing things on it, and finaly had real consistancy in the car, but our driving sucked! Took the 428 out and put a 400 out to 468 with some Aluminumn Kaufman Heads Comp cam etc. While we have not dyno'd it should make an easy 75-100 more horses. I thought that the old Lakewood...
- Thu Jul 17, 2008 4:52 pm
- Forum: Chassis and Suspension
- Topic: Feedback on hook
- Replies: 6
- Views: 5629
Re: Feedback on hook
Have not gone higher on shock seting yet. Tried putting the slick pressure up first runs at this event and spun em out of the hole. Went down on tire pressure then discovered by track photo this! Of course this photo was found the last day of the event! It is foot braked and am trying to develop a g...
- Wed Jul 16, 2008 10:27 pm
- Forum: Chassis and Suspension
- Topic: Feedback on hook
- Replies: 6
- Views: 5629
Feedback on hook
Any opinions on the hook of the Goat? 9" x 28", QA1 single adj. coil over 3 up from softest setting, 95lb. springs, 12 PSI in slicks, stock Pontiac rear sway bar, Edelbrock adj. uppers and Hothkiss lowers. 4.10 in Chevy 12 bolt. 60' 160's 10.90-11.00 in hot weather. Weighs little over 3,00...
- Mon Jul 14, 2008 9:11 pm
- Forum: Engine
- Topic: Pontiac 867 heads
- Replies: 8
- Views: 10240
Re: Pontiac 867 heads
You talking Chevy block or a Real Poncho? I was looking at some old Ford C heads, stuff that was used up fairly bad!
- Mon Jul 14, 2008 9:03 pm
- Forum: General BS
- Topic: NHRA/ PINKS all out
- Replies: 2
- Views: 3282
Re: NHRA/ PINKS all out
while your at it go bitch to Connie Kalitta or John Medlin!
- Wed Jul 09, 2008 11:42 pm
- Forum: General BS
- Topic: Pontiacs are getting faster!!!
- Replies: 2
- Views: 3129
Re: Pontiacs are getting faster!!!
Do not recall whose heads but some new ones at Pontiacs in the Park @VMP Based off of 351 Cleveland Ford
- Sun May 18, 2008 4:29 pm
- Forum: Drivetrain
- Topic: Need Some Torque Specs.
- Replies: 4
- Views: 5118
- Sun May 18, 2008 4:19 pm
- Forum: General BS
- Topic: fiberglass camaro doors
- Replies: 2
- Views: 3429
Glass doors
Try VFN ?
- Sun May 18, 2008 4:18 pm
- Forum: General BS
- Topic: '64 Goat
- Replies: 1
- Views: 2779
'64 Goat
Got the new motor in the 'ole GTO. Still have the tri power but maiden voyage was a couple 7.0's and a dip in th 6.80 range on our locale 1/8th mile track. Was fairly happy. Will be at Virginia Motorsport Park for the Pontiacs in the Park event the end of month. See what we do in the 1/4 ! :D Ole Go...
- Thu Mar 27, 2008 6:52 pm
- Forum: Drivetrain
- Topic: Stick Trans
- Replies: 1
- Views: 3166
Stick Trans
I have not noticed or am to lazy to find, but is any body running that antiquated manual trans?