My memory isn't great on this, but it seems to me his first problem was a broken tailhousing, maybe two of them, then he broke a bell housing. I believe he did the driveshaft change, added pinion snubber and put a different transmission in it all at the same time and problem went away. Hard to tell...

Another vote for the driveshaft, But I think it may be too short. Had a buddy of mine, Got him some good shocks on the car that made it dead hook, 3 passes later, broke the case. So thinking it may have been just one of those deals, replaced the case again. 3 passes later, broke the case. So really...

One of my buddies broke a number of bellhousings, including a Ultra bell in his G-body. He did a shot gun approach, putting in a pinion snubber and changed the drive shaft length at the same time and it fixed it. Most likely at some point it's bottoming out the driveshaft. Thanks John I took the la...

mytmouz wrote:How much cage 'ya got in them?

No cage at all in them

Hey John, Do you run at the Grove? I got a few buddies at S&W if you want I can give you their contact info, in fact one of them even races a Monte. Let me know. Bruce Hey Bruce I run at numidia the grove is only 24 miles from my place if you got someone that can help give me their contact info...

Carolina Kid wrote:be sure the driveshaft is not to long.

I ck the driveshaft length but not the angle power house makes a driveshaft angle gauge ever use one local trans shop told me that if the angle is off it will brake the bell

Has anyone ever had a problem braking the bellhousing on their auto trans. I have a g body monte carlo that brakes the bell and soon the bank. Both of my montes have broken the bells. Both cars are foot brake raced, first car 1985 monte 3510 with driver 355 motor 12 bolt rear 32" s&w ladder...

I have a 87 monte 383 I went from a 3310 vac to a 4779 and the car went a 10th. The 60 stayed the same 1.61. I only switched to see if it would run closer to the number and it did.
383 6'' rod 180 heads 10.8 comp 294s comp cam 1.6 rockers victor intake runs 11.90@110

How much do you pay for your nitrous. Airgas gave me a price of 155$ for a 60lb bottle.
Hey John thanks

John give me a parts list on filling the bottle with out a pump and what temp is the mother when you fill. thanks

Sorry 35$ for the rear the rest is for them to burn it out for you and bring it to your truck. If you need directions go to www.wehavecars.com and look them up. Joes used auto parts they also have an 800# to call. You can get one of the cummings diesel out of a dodge truck for 90$ any gas engine for...

GO with the 8.5 for street use 50$ local junkyard stay away from gov type locking diff.

Try a vacuum gauge. I had the same problem and turned out that my intake gasket was leaking. My 041 heads were cut down and the bottom of my intake was was pulling air.