Search found 6 matches

by SaskCharger
Sat Jul 18, 2009 12:52 pm
Forum: Chassis and Suspension
Topic: Ladder bars and wieght setup
Replies: 17
Views: 21582

Still Not Good

Well I'm still not happy with the 60' Best this year is a 1.551 but usually it's in the 1.58 - 1.60 I feel it should work better. I currently have my ladderbars mounted in the middle hole. I'm going to move it up to the top and see if this helps. I'm still not sure if I have the coil overs set up pr...
by SaskCharger
Wed Jun 03, 2009 10:52 pm
Forum: Chassis and Suspension
Topic: Ladder bars and wieght setup
Replies: 17
Views: 21582

Re: Ladder bars and wieght setup

They are QA! double adjustables

I finally got a copy of Morgans Doorslammers so I'm reading late into the night, who knew centers could be instant.
by SaskCharger
Sat May 30, 2009 4:10 pm
Forum: Chassis and Suspension
Topic: Ladder bars and wieght setup
Replies: 17
Views: 21582

Re: Ladder bars and wieght setup

So you figure the comprssion settings in the back are too stiff?

They are 150# springs.
by SaskCharger
Sat May 30, 2009 11:44 am
Forum: Chassis and Suspension
Topic: Ladder bars and wieght setup
Replies: 17
Views: 21582

Re: Ladder bars and wieght setup

I appreciate the replys. Well I took the car to the track last night. It launches straight no pull either way. So handeling was fine both at the start and through the entire run. Bill I checked out your site. That is a lot of info it's going to take a while to sort through that but i plan to. The fr...
by SaskCharger
Thu May 28, 2009 11:38 pm
Forum: Chassis and Suspension
Topic: Ladder bars and wieght setup
Replies: 17
Views: 21582

Re: Ladder bars and wieght setup

Yes, you want equal rear tire loading, but NOT on the scales. You want equal rear tire loading during your launch. Presently, your RR is heavier than your LR (on the scales), but, as you apply driveshaft torque, the LR will become much heavier than the RR. In other words, the driveshaft torque grea...
by SaskCharger
Thu May 28, 2009 7:06 am
Forum: Chassis and Suspension
Topic: Ladder bars and wieght setup
Replies: 17
Views: 21582

Ladder bars and wieght setup

I recently installed a set of CE ladder bars in my car. Last weekend I made my first passes with this setup. I got the best et, mph and 60' ever so I'm pretty happy. After talking to some guys at the track and doing a bit of research I realized my setup of the bars is far from perfect or good. I got...