Search found 125 matches

by aitch o
Mon Mar 29, 2010 1:15 pm
Forum: MSD Ignition
Topic: To MSD 7al-2 or not to!
Replies: 5
Views: 13000

Re: To MSD 7al-2 or not to!

7al-2 is a very good box.
you do need to change coils. i recommend the 8251.
your start retard will still work.
by aitch o
Wed Mar 24, 2010 8:28 am
Forum: General BS
Topic: Pulling timing on the top end
Replies: 10
Views: 6327

Re: Pulling timing on the top end

making it work,
making it work well,
and making it live,
are 3 different things.
i have not got past step one.
that is why I am down 1-0 to everyone in the mako field.
by aitch o
Tue Mar 23, 2010 4:06 pm
Forum: General BS
Topic: Pulling timing on the top end
Replies: 10
Views: 6327

Re: Pulling timing on the top end

i don't know about that one mr. up-one-on-me.
if i had hp to throw away like you big block guys, i might try it.
but i have to run the little motor pretty hard just to be able to see your taillights.
by aitch o
Tue Mar 23, 2010 10:08 am
Forum: General BS
Topic: Pulling timing on the top end
Replies: 10
Views: 6327

Re: Pulling timing on the top end

craig,
try pulling 2-4 degrees over 7000 rpm.
might be worth .05 et and 1-2 mph (in the 1/4 mile)
scott
by aitch o
Sun Mar 14, 2010 10:19 am
Forum: Engine
Topic: HEADER GASKETS
Replies: 10
Views: 6681

Re: HEADER GASKETS

gaskets in a tube.
permatex red.
by aitch o
Thu Mar 04, 2010 7:29 pm
Forum: Engine
Topic: CSR Waterpump's
Replies: 6
Views: 5950

Re: CSR Waterpump's

black is ground.
blue is hot.
by aitch o
Thu Mar 04, 2010 6:04 pm
Forum: Engine
Topic: Head Gaskets For 300 Shot of Nitrous ?
Replies: 9
Views: 9458

Re: Head Gaskets For 300 Shot of Nitrous ?

i am with sam (tubbed truck) on this one. had real good luck with the felpro 1004 spraying 300 on a plate. steam holes were in block but not head. no problems. for small blocks, i strongly recommend retorqueing the heads after a couple of heat cycles. the long middle studs seem to loosen about 5-10 ...
by aitch o
Wed Mar 03, 2010 8:32 pm
Forum: General BS
Topic: Weighed the car tonight...
Replies: 41
Views: 20720

Re: Weighed the car tonight...

you are still overweight on the chute launcher mr. heard.
because mine weighs 0.
by aitch o
Sat Feb 20, 2010 7:00 pm
Forum: General BS
Topic: Weighed the car tonight...
Replies: 41
Views: 20720

Re: Weighed the car tonight...

ok mr heard.
i see your post.
and you have set the bar pretty high.

but i did pull out the windshield wiper linkage last week and the firewall insulation.
so i am catching up slowly.
by aitch o
Sat Feb 20, 2010 6:58 pm
Forum: General BS
Topic: my new junk
Replies: 12
Views: 7561

Re: my new junk

beautiful.
be proud.
run the piss out of it.
by aitch o
Tue Feb 16, 2010 3:07 pm
Forum: General BS
Topic: john heard we need updates
Replies: 17
Views: 10942

Re: john heard we need updates

it is dual crank drive F3's.
by aitch o
Mon Feb 15, 2010 7:46 pm
Forum: General BS
Topic: john heard we need updates
Replies: 17
Views: 10942

Re: john heard we need updates

those dang administrators, always jacking with a good post.

anyway, he is selling me short.
and the creativity about what little weight is going to be put back on. no rules against acid dipping or hole saws, gun drilled bolts, titanium everything.............o the list goes on and on.

:lol:
by aitch o
Mon Feb 15, 2010 3:43 pm
Forum: General BS
Topic: john heard we need updates
Replies: 17
Views: 10942

Re: john heard we need updates

john could give you accurate numbers to the tenth of a pound.
but i would guess 250 to be close.
hood is 28.
fenders about that.
steering box was 17.
radiator with fan and water, 25ish?
and on....
by aitch o
Sun Feb 14, 2010 8:13 pm
Forum: General BS
Topic: john heard we need updates
Replies: 17
Views: 10942

Re: john heard we need updates

In poker terms..........
I will see your trash box of removed weight.

And raise you a full steel front clip.
by aitch o
Sat Feb 06, 2010 8:06 pm
Forum: General BS
Topic: swap meet
Replies: 55
Views: 29373

Re: swap meet

that tach is a very good first cut data source.
if you remember to push the record button.
telling on myself there.