just fyi i used the summit 37 degree tool to do abt half my brake system and it worked well no leaks. not bad for $30.

for the single flare 45 degree stuff i used a $25 tool from amazon. i think the kit i bought was from skinny kid? an3 and 3/16 hard line

that looks amazing

thanks guys.

I got a best 60' of 1.412 so it is definitely working a lot better now.

need to look at some shock changes to see if I can get it in the 1.30s

looks awesome. whats the goal with the new motor?

I know people who use the thin steel plate without any mods to the converter.

with the thicker plate, I suspect that you have to lengthen the converter snout

well, i finally nixed the problem, and it turned out to be a variety of things, but the biggest one was toe out. here are the problems that we had to fix 1. toe out 2. too much air pressure in the slicks 3. unsquare rear end from least bad to worst 1. squaring rear end. my buddy came over and helped...

That should make a big difference! You might be able to get by with a tiny bit less toe-in at rest to reduce it at full extension, but you should check it so that you're sure it doesn't go toe-out when under compression. For example coming down from a wheel stand. But you have made a huge improveme...

ok, its been determined that the rack is the wrong one. so that might be the reason why I had over half inch of bumpsteer with the front end lifted. I was going from toe in at rest to toe out under power. btw, I ordered these toe plates . best $60 Ive spent this month http://www.summitracing.com/par...

supernova wrote:You aksed for it.....

http://www.youtube.com/watch?v=N4W6Vra_tc8

http://www.youtube.com/watch?v=dYYfJKbuTxs

http://www.youtube.com/watch?v=Zt1IHaynAsw

NIIIICE

Ok, hears what we found out....... The new converter Sucks on nitrous!!!!!!!!!!!! The motor on nitrous blows through the converter so bad that the shift light stays on when going into high gear....... The converter works great on motor. It ran a 6.35 at 112 mph on motor only. I had the nitrous set ...

ha,

you forget my car is in two shades of primer. lol

my car wont work well for a grudge car though. Its slow

niiice burnout man. http://texaspic.net/p817907809/h11ee7f77#h11ee7f77 i wish i had known you were going i would have come out this car would make a sick grudge car We might do some grudge racing with. Realy need to get the nitrous on and see where we're at with it. I have a small carb race coming ...

supernova wrote:Nice picture.
We're going to k-Dale on Wednesday after work for some more testing.

awesome. ill try to come out. i want to see that car in person

John_Heard wrote:Where are you located at?

DFW

I do all my own stuff albeit a shop would do a better job for a price. I learned to do it my self. Did you get my message about going to the track Wed? I would be glad to help you with it. no, i did not get any messages. hmm, thats weird. thank you for the offer to help. i appreciate that. i'll pm ...