Do you think felpro 1004 would handle a 300 shot. That is what i had before on the motor

Thanks.

Do you have a part # you could recommend.

What head gaskets should i use for a 300 shot of nitrous. I have a Dart lttle m block with a 4.155 piston with no steam holes. Can i use a head Gasket that has steam holes in them even though my block doesnt have them? Can i get some part #s also. Thanks for the help.

Supernova, i called cfm today and he going to port my intake manifold Mike is a nice guy. I am going to get the new 235 from afr so i should see some gains i might even have mike work those over if my budget allows for it. He told me to expect about 20 horsepower over a non ported 2925 intake. My co...

Yes, when i originally built the motor nitrous was the plan, but my buddy wants to get rid of his f2 so i can get a killer deal on one.

Well now i am confused. lol My cam card says. ex closes 23 atdc in opens 27 btdc ex opens bbdc in closes 57 abdc cam is 264-272 648-627 109 lobe sep I want to put a supercharger on it maybe 10#s on pump gas and on race fuel pulley it to 15+ #s. Do you think it is possible with my compression.

5cc on the flat tops and the head gasket are 41 cc and bore size 4.190......... Felpro 1004

I think it is 11.1 compression but i dont know for sure here is my engine specs let me know what it is. 434 sbc, flat top je pistons 2 valve reliefs, 4.155 bore, 4.000 stroke, 6.000 rods, 75 cc heads, 41. thick head gaskets, the pistons are in a dart little m block built by ohio crankshaft so it is ...

I was looking at afr 235 heads would you swap to those heads over my race ready 227 eliminators. I was thinking maybe a 30 hp gain but who knows i would also get 1.6 rockers so my cam would be bigger. I also thought about getting a converter speciffically designed for my setup. I think a converter w...

the car has a 28 x 10 slick i might just run it and borrow my friends 1050 dominator and see if it picks up.

Would you change to a dominator carb like a holley 8896-1 or do you think my carb is fine. Also what do you think about my cam for my setup, car will be on a 300 shot. My goals are low 10's high 9's on motor and high 8's on juice. here are the specs. 434 sbc 11.1 compression Afr 227 eliminator heads...

Does it really have a benefit? I heard people claim that it slows the car down due to the air building up under the hood. I am looking to put my car on a diet and dont want to use fiberglass bumpers cause it is a street car so i am looking for the next best thing. Also thinking about removing the he...

What mufflers are available that are free flowing and keep the car somewhat quiet. The car has a 434 sbc and makes 650 hp. Keep that in mind also. Thanks

Hi, John Thanks for your reply. The reason i say is 8's possible cause my buddy has a 89 iroc with a 383 with track 1 heads Dfi fuel injection and 2 stages of nitrous combing a 300 hit total. Here is a basic run down of his car 383 12.1 254,260 113 lobe sep 600 lift solid roller cam, 1 3/4 headers t...