thank you very much. Not changing subject, what kind of times did you turn in your camaro with that setup? After I get this rear done, I am going to cut some wt out of the front then, You can remove the whole front crash bar or bumper brace? I already removed the crash bars in the doors, I have down...

Your camaro, did you do any mods to your front crash bar. I was told that you can aleviate a good bit of wieght by cutting the nader bar up and just leave some to keep the nose in place.

Any other suggestions you have would be greatly appreciated.

OK, I have everything completely gutted, do you need to cut out the trunk, then mount the frame rail, then weld in the new metal?

Again, Thank you very much for your help.

Does anyone run a Crank Evac System? (The tubes from valve covers to the headers) I have a 454, I have them on, also on my dad's 400 sbc. But a friend of ours said that causes more harm than good and it builds moisture. Any help here. Do you have to run a PCV valve or Evac System? Or can you just ru...

Thank you for your help. This weekend I am going to put the pass. side in and then start the rear of the car.

I will have to check that out. I have everything in a 79 camaro. I had the car for about 12 years now. It had a 327 someone put in it, the guy that had it blew up the 305. I had the 327 rebuilt and at the track the car went 13.08, with the B/B it went 12.00 I tried a sniper kit on it and bumped up t...

I don't think there is anything in the way. I just have to get the rear frame rails in, from the lip on the inside to the new frame rails looks like it will open up the width by about 5 1/2 inches. My other question, how do you check to make sure everything is squared up? I am thinking that check si...

:?: New Guy here. Has Anyone installed C/E weld in sub frame connectors and the Rear frame rails? Currently in the process and would appreciate any help. Also, how do you know how big of wheel tubs you need? 36", 38", 40". The run down is that if I still lived in PA, I wouldn't really...