Search found 56 matches
- Tue May 01, 2012 3:16 pm
- Forum: Drivetrain
- Topic: Dse wheel tubs purchaced
- Replies: 40
- Views: 45639
Dse wheel tubs purchaced
Ok here is the delema I bought wheel tubs from dse cause I liked the way they fit. Any way same as piecing a strip in with out all the weld joints they told me 315x30x18 tire with 5bs, hello I don't want pro touring tires Duah. I wanted like 28x13.5x15 but they said it won't work will rub alittle am...
- Sun Mar 18, 2012 11:44 am
- Forum: In the Shop
- Topic: 72 Ventura II. Wheel tubs
- Replies: 0
- Views: 8751
72 Ventura II. Wheel tubs
I'm working on a 1972 Ventura II. Wheel tubs widening I just bought the outer wheel tubs from summit ok now what about the inners I seen dse has a set for the car but it only goes so far as tire diameter I'm using like a 28x13.50- 15 tire on a center line rim #cll005107545 I belive if I'm correct th...
- Wed Sep 21, 2011 10:23 am
- Forum: Drivetrain
- Topic: Differential gears limited slip to posi traction
- Replies: 15
- Views: 36226
Re: Differential gears limited slip to posi traction
sweet i guess im all set then
- Tue Sep 20, 2011 7:49 pm
- Forum: Drivetrain
- Topic: Differential gears limited slip to posi traction
- Replies: 15
- Views: 36226
Re: Differential gears limited slip to posi traction
what about this one? Brand Moser Engineering Manufacturer's Part Number 542052 Part Type Differential Carriers Product Line Moser Engineering Auburn Pro Series Limited Slip Differentials Summit Racing Part Number MSR-542052 Aftermarket Carrier Style Limited slip Cover Bolts 10 Axle Shaft Spline Quan...
- Tue Sep 20, 2011 7:41 pm
- Forum: Drivetrain
- Topic: Differential gears limited slip to posi traction
- Replies: 15
- Views: 36226
Re: Differential gears limited slip to posi traction
ok im confused now is the aburn a true track ??? or true track a difrent brand? i dont think they come with the gears allready installed
- Sun Sep 18, 2011 11:37 pm
- Forum: Drivetrain
- Topic: Differential gears limited slip to posi traction
- Replies: 15
- Views: 36226
Re: Differential gears limited slip to posi traction
so far my mind is set on a th350 and 435hp i know that has some factor in it too rear tires are 28x13.50x15 mickey thompson et street
- Sun Sep 18, 2011 10:21 am
- Forum: Drivetrain
- Topic: Differential gears limited slip to posi traction
- Replies: 15
- Views: 36226
Re: Differential gears limited slip to posi traction
I'm going to be primarily using it for street use but when I need to race it, I want it to be there
- Sat Sep 17, 2011 10:53 pm
- Forum: Drivetrain
- Topic: Differential gears limited slip to posi traction
- Replies: 15
- Views: 36226
Re: Differential gears limited slip to posi traction
wow thats a lot of info on your site! so im replacing the whole center stuff with 3:73 gears like a detroit trutrac? how do i find out witch brand i need to fit rear end?
- Fri Sep 16, 2011 10:03 pm
- Forum: Drivetrain
- Topic: Differential gears limited slip to posi traction
- Replies: 15
- Views: 36226
Differential gears limited slip to posi traction
i have a question for anybody who knows im building a street strip car its a 1972 pontiac ventura II has a straight 6 in it but going to a v8 hopefully 435hp. ok im using the original rear end finding this out its only limited slip i need posi and need th know the gear ratio on this rear end, and ho...
- Fri Aug 26, 2011 7:23 pm
- Forum: General BS
- Topic: Dash Pad Covers - Anyone use one?
- Replies: 54
- Views: 32789
Re: Dash Pad Covers - Anyone use one?
Hey speaking of that i know what your talking about but i dont think its that much weight really. but it might make a diffrence, i took mine out this past week i need one too, i did recover an old 1979 chevy pickup once in red vinal was green, used contact cement, it looked ok not too shabby. sorry ...
- Fri Aug 26, 2011 2:29 pm
- Forum: Chassis and Suspension
- Topic: mini tubbing, cuting and locations.
- Replies: 2
- Views: 3533
Re: mini tubbing, cuting and locations.
well the fun part will be the cut to form it to the outter quarters my self we dont cut into the frame we cut it flush to the frame rail and we fit 10.5 w on a 10 inch rims with 6.5 back spacing with a stock length rear end and we have about 1/2 to 3/4 inch on either side and you should have more w...
- Thu Aug 25, 2011 8:40 pm
- Forum: General BS
- Topic: You and your ride... Post it here get to know everyone...
- Replies: 1525
- Views: 1006688
Re: You and your ride... Post it here get to know everyone..
My 1972 ventura II working on it at this point has been hectic finding out what has rusted away. i cannot beleive after 12yrs ago i fixed the floorboards and they prety much rusted out, my bad i should have bought a good floor pan instead of using crappy sheetmetal from a place i used to work
- Thu Aug 25, 2011 7:14 pm
- Forum: General BS
- Topic: You and your ride... Post it here get to know everyone...
- Replies: 1525
- Views: 1006688
Re: You and your ride... Post it here get to know everyone..
oh ill have to see what i can do
- Thu Aug 25, 2011 7:05 pm
- Forum: General BS
- Topic: You and your ride... Post it here get to know everyone...
- Replies: 1525
- Views: 1006688
Re: You and your ride... Post it here get to know everyone..
Hello my name is dave, im 39yrs old i live in norwalk ohio about 10min from the drag strip im married i have 2 sons and a daughter, my wifes name is shawna we have been married for about 7yrs now. i have a 1972 pontiac ventura II i bought back in 1994 for 700.00 has a 250 straight six getting a v8 ...
- Thu Aug 25, 2011 3:22 pm
- Forum: Chassis and Suspension
- Topic: mini tubbing, cuting and locations.
- Replies: 2
- Views: 3533
mini tubbing, cuting and locations.
Question: how far do you cut frame rails in for a mini tub? and how long front to back? do you just cut up to frame rail or cut into it cutting off the 1/2" flange out off the frame rail, and welding it to the floor flush? and far as where you cut for lenght where do you stop and start? im real...