NEED helpwithmustang that wonthook PLEASE

[bottlesempty]

ar isa 2004MACH14.10gearswith a100shot 60' is in th2.0-2.3 rangewitha 275MT ETdrag radialstill havestock controlarms N20on athrottleswitch as soon as the pedal goes to thefloor itblows th e tiresawayWILLCONTROLARMShelp with thisproblemthecargoes 12.80's atover118MPHwhich makes mebelieve it may have amid 11 i n it with sometraction therimsare17"and I'm unsure ifswitching to a15" withmore sidewall mayhelpHOWIMPORTANT ARETHECONTROLARMS?inhooking up afactory 4link

[DL]

what air pressure u running and what kind of burnout u doing!!

[bottlesempty]

18psiwithasmoky burnout

[DL]

so ur running 275 mt with 17' or 15' wheel

[wikd69]

doyouwantsomehelpwithpunctuationtoo?

Don't hit me, they keep me around here for comic relief

[bottlesempty]

17"seriously considering going to a 15"rim tohave some sidewallHOWimportantare thecontrolarms ANY BRANDyou all suggest?

[DL]

doyouwantsomehelpwithpunctuationtoo?

Don't hit me, they keep me around here for comic relief

lol!!!!!


get some 275 60's and put them on a 15 inch wheel and see how it runs with 16 psi for a starting point.

[ricksterman]

First off do you have an auto or stick? If it's a stick, you're better off going right to 28" tall slicks (15 x 10.5 MT ET drag) -and sorting things from there. Unless you're at a very good track it will take some work to get the car to hook with radials if you're spraying off the line, especially with 4.10's.

If you don't have 31 spline axles that should be your first mod, along with welding the axle tubes. Also make sure you don't hit the factory rev limiter on the spray, you will run into problems.

As far as lower control arms, if that's all you change I doubt it will make much difference in your case. It took me quite a while to get it all figured out with a T56, PD blower and a track where you don't lose your shoes.

[jumbo]

If your going with a 15" wheel get a 275/50/15. You dont need a 28" tall tire, 26" will be better for you.

[Dave Morgan]

I agree with the comment that control arms, alone, won't help. What brand of shocks do you have?
Dave

[bottlesempty]

strange adjustableshocks and struts EIbach drag launch springs