street car traction
Moderators: David Lemmond, Dave Morgan
-
- Posts: 212
- Joined: Fri Mar 14, 2008 2:52 pm
- Location: Plano Texas
street car traction
I have a 55 chevy with a 355 that has 308 to the rear and a 125 shot that I dont have numbers for. It has a th350 3200 stall an 8.8 3.73 at m/t 27" tall drag radials. The rear is a 5 stack spring with traction bar no sway bar polly bushings and cheep shocks. The front is stock springs tube arms 1' swaybar kyb shocks. On the street on motor the car spins through first and most of second but it does go straight. Do you think lake 70/30 and 50/50 shocks would help? How are they on the street? I don't car about the ride just dont wont the car all over the place. I have looked at qa1 but at 140 a pop geeeeeeeeeeeeee. Thaks for your input
My car is not as fast as I think it is.
Re: street car traction
What tires?
1974 Pontiac Ventura, 455P (9.5:1 comp.), 850DP, 3100 ''Tight'' 10'', 3.73's/28x13.5
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
-
- Posts: 212
- Joined: Fri Mar 14, 2008 2:52 pm
- Location: Plano Texas
Re: street car traction
What size?
Its tough to get good traction on the street with any tire, the MTDR's help but its still a crapshoot at times.
Its tough to get good traction on the street with any tire, the MTDR's help but its still a crapshoot at times.
1974 Pontiac Ventura, 455P (9.5:1 comp.), 850DP, 3100 ''Tight'' 10'', 3.73's/28x13.5
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
Who is online
Users browsing this forum: Bing [Bot] and 15 guests