Removing the innner fender wells?
Moderators: David Lemmond, Dave Morgan
Removing the innner fender wells?
Does it really have a benefit? I heard people claim that it slows the car down due to the air building up under the hood. I am looking to put my car on a diet and dont want to use fiberglass bumpers cause it is a street car so i am looking for the next best thing. Also thinking about removing the heater box in the engine bay, how hard is it to remove? Also how much would i save in weight buy removing the inner fender wells and heater box? Thanks
- hugger73hatch
- Posts: 360
- Joined: Sun Oct 21, 2007 10:42 pm
Re: Removing the innner fender wells?
Inner fenders total about 40 lbs If memory serves me correct. I took mine out a couple of years ago. I think the weight savings out benefits the wind deal IMHO.
73 Nova Hatchback, 408 Small Block 13-1, Iron Heads, 6.972 @ 98.362, 1.468 60', 3450 lbs, still tuning
28 x 9 Slick, N/A
http://www.esquireservices.net
28 x 9 Slick, N/A
http://www.esquireservices.net
Re: Removing the innner fender wells?
My inner fenders were 25 lbs. Didn't slow me down any when I took them out.
I forget how much the heater stuff weighed. Quite a bit. You can pull it all without removing the fenders.
I forget how much the heater stuff weighed. Quite a bit. You can pull it all without removing the fenders.
Craig Watson
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: Removing the innner fender wells?
When I went to a fiberglass hood, I lost the hood arms the latch and support. I also ditched the sway bar and inner fenders. I wanna say it saved me 200 or better.
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
- Bruce69Camaro
- Posts: 1799
- Joined: Thu Jul 23, 2009 11:07 am
- Location: PA
Re: Removing the innner fender wells?
When I removed my heater box out of my 69 camaro, I took a piece of 16awg metal and welded it in to cover the opening. Now they sell pieces to just bolt over the box. Do a search to see if anyone offers this for your car?
It's a lot easier to bolt on a cover then to do all the repair work to make the firewall look good.
Just my opinion....
Bruce
It's a lot easier to bolt on a cover then to do all the repair work to make the firewall look good.
Just my opinion....
Bruce
Those who think they know it all have no way of finding out they don't.........
Who is online
Users browsing this forum: No registered users and 10 guests