I know Craig is getting his car 4 CORNER SCALED but is there anyway to get an idea of weight distribution if you dont have access to those race scales.
I do have fairly easy access to a truck weight bridge but not sure they are very accurate
Thanks
Royz
weight distribution
Moderators: David Lemmond, Dave Morgan
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Roy are there any circle track racers around your area? A lot of those guys have a set of scales, and it's pretty common that some of them will come over to your house and scale your car for you for a case of beer
You could get an idea of front to rear weight distribution by pulling just the front wheels on a truck scale, then the whole car. They may be off a bit for the weight, but should be the same % off more or less front to rear, then you could see how much lighter the rear was than the front. It won't tell you cross weights, but better than nothing.
You could get an idea of front to rear weight distribution by pulling just the front wheels on a truck scale, then the whole car. They may be off a bit for the weight, but should be the same % off more or less front to rear, then you could see how much lighter the rear was than the front. It won't tell you cross weights, but better than nothing.
Who is online
Users browsing this forum: No registered users and 5 guests