wheelie bars on 71 nova
Moderators: David Lemmond, Dave Morgan
wheelie bars on 71 nova
Hello everyone,
I've got my car hooking up killer finnaly! I almost put it on the back bumper at the tune and test on saturday. I got the wheel stands under control with a few more clicks of rebound in the front shocks. I think I would like to add wheelie bars now.
#3000 race weight 71 nova, stock width Chris Alston fab 9 with back brace, Split mono leafs with Caltracs, 30" x 9" slick.
What do you recomend for wheelie bars and what length would be good on this combo?
If you have experiance with different brands, kits, or lengths please list pros and cons. Thanks:)
I've got my car hooking up killer finnaly! I almost put it on the back bumper at the tune and test on saturday. I got the wheel stands under control with a few more clicks of rebound in the front shocks. I think I would like to add wheelie bars now.
#3000 race weight 71 nova, stock width Chris Alston fab 9 with back brace, Split mono leafs with Caltracs, 30" x 9" slick.
What do you recomend for wheelie bars and what length would be good on this combo?
If you have experiance with different brands, kits, or lengths please list pros and cons. Thanks:)
[youtube]pWMP4iSIAhk[youtube]
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: wheelie bars on 71 nova
Never ran them myself, but I've been told you don't want unsprung wheelie bars on a leaf spring car. When the car leaves the springs wrap up and will throw solid bars down into the track. So if you do it, get sprung bars and mount them as high as you can.
My 1971 X275 Nova | Facebook
Re: wheelie bars on 71 nova
I would think if you have it tune as you say you do now leave it a lone.....
But if you need wheelie bars, most of the guy's around here run solid bars as long as they can get them and very high of the ground to let the leaf spring suspenion do what it's suppose to do....Thats on the faster leaf spring cars like Kule Huettles 69 Camaro.
http://www.streetfire.net/video/kyle-hu ... 199929.htm
This guy here went 4.88 at 148 with no wheelie bars:
http://www.youtube.com/watch?v=4Ye_3JBdCZU
Follow Johns advice on slow cars like the rest of us have...
But if you need wheelie bars, most of the guy's around here run solid bars as long as they can get them and very high of the ground to let the leaf spring suspenion do what it's suppose to do....Thats on the faster leaf spring cars like Kule Huettles 69 Camaro.
http://www.streetfire.net/video/kyle-hu ... 199929.htm
This guy here went 4.88 at 148 with no wheelie bars:
http://www.youtube.com/watch?v=4Ye_3JBdCZU
Follow Johns advice on slow cars like the rest of us have...
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
Re: wheelie bars on 71 nova
Thanks for your post bert, don't mean to hijack but I have a similar problem. 68' Camaro, stock front, monoleafs and ladder bars out back with a 582 between the fenders. If I bring the engine up on the brake and leave at 4500rpm the car stands itself on the back bumper. So I take it the sprung wheelie bars are the way to go? Any particular brand or size or is there a way to launch without them?
Re: wheelie bars on 71 nova
I kinda agree with John.
I ran solid for a couple years then switched over to the spring. It just made the car lift at a smoother rate than slamming it.
I ran solid for a couple years then switched over to the spring. It just made the car lift at a smoother rate than slamming it.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: wheelie bars on 71 nova
I thought Kyle's 69 was a ladder bar car?
Bert - something else I didn't mention is if you're on a slick, the best answer is to put more power to it. If it's standing up on the bumper it's dead hooking, put more power to it so it will slip the tire a little. Controlling that wheel speed "just right" will be the fastest 60'. It'll take some work to find the sweet spot. A data logger and driveshaft speed sensor are your friend for that.
Bert - something else I didn't mention is if you're on a slick, the best answer is to put more power to it. If it's standing up on the bumper it's dead hooking, put more power to it so it will slip the tire a little. Controlling that wheel speed "just right" will be the fastest 60'. It'll take some work to find the sweet spot. A data logger and driveshaft speed sensor are your friend for that.
My 1971 X275 Nova | Facebook
Re: wheelie bars on 71 nova
John_Heard wrote:I thought Kyle's 69 was a ladder bar car?
Bert - something else I didn't mention is if you're on a slick, the best answer is to put more power to it. If it's standing up on the bumper it's dead hooking, put more power to it so it will slip the tire a little. Controlling that wheel speed "just right" will be the fastest 60'. It'll take some work to find the sweet spot. A data logger and driveshaft speed sensor are your friend for that.
The car that Kyle ran in Extreme Street with the Texas True Ten.5 was a leaf spring car with long wheelie bars.
He held the stock suspenion record here in Texas with that car for a long time.... Now is it still a leaf spring I don't know. It was then.
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: wheelie bars on 71 nova
Was it the one with the cowl scoop or the one with the big scoop on it, he's got two of them. I've only looked at the "street" car with the small motor.supernova wrote:John_Heard wrote:I thought Kyle's 69 was a ladder bar car?
Bert - something else I didn't mention is if you're on a slick, the best answer is to put more power to it. If it's standing up on the bumper it's dead hooking, put more power to it so it will slip the tire a little. Controlling that wheel speed "just right" will be the fastest 60'. It'll take some work to find the sweet spot. A data logger and driveshaft speed sensor are your friend for that.
The car that Kyle ran in Extreme Street with the Texas True Ten.5 was a leaf spring car with long wheelie bars.
He held the stock suspenion record here in Texas with that car for a long time.... Now is it still a leaf spring I don't know. It was then.
My 1971 X275 Nova | Facebook
Re: wheelie bars on 71 nova
The one he ran in TTT.5 was the cowl hooded car. Forward mounted hood scoops are not allowed in any TTT.5 classes.
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
- CDR Performance
- Posts: 147
- Joined: Tue Mar 02, 2010 7:41 pm
- Location: Indianapolis, Indiana
Re: wheelie bars on 71 nova
As mentioned with leafs you need to be sprung and soft. The wheelie bar should have no vert bracing and be compressible. I would look at 72" to 84".bert wrote:Hello everyone,
I've got my car hooking up killer finnaly! I almost put it on the back bumper at the tune and test on saturday. I got the wheel stands under control with a few more clicks of rebound in the front shocks. I think I would like to add wheelie bars now.
#3000 race weight 71 nova, stock width Chris Alston fab 9 with back brace, Split mono leafs with Caltracs, 30" x 9" slick.
What do you recomend for wheelie bars and what length would be good on this combo?
If you have experiance with different brands, kits, or lengths please list pros and cons. Thanks:)
A lot of variables need to be addressed, Tune, HP, Tires, Chassis, Control box or Dots?
CDR PERFORMANCE
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
Who is online
Users browsing this forum: No registered users and 28 guests