Chevelle steering box

Suspension Tuning, Troubleshooting, Design and Discussion

Moderators: David Lemmond, Dave Morgan

Post Reply
Message
Author
Gus68
Posts: 77
Joined: Mon Oct 01, 2007 6:09 pm
Location: Minnesota

Chevelle steering box

#1 Post by Gus68 » Sat Oct 02, 2010 5:37 pm

Hey guys! The manual steering box in my chevelle is kind of loose. When I go straight down the road I can wiggle the wheel back and forth with out actually turning the car. So I loosend the jam nut and tightend the adjuster screw just a little (not quite a full turn). It seemed to tighten up the looseness going straight but made it stiffer when turned to almost full lock. Is the dumb thing just worn out???? Or am I doing something wrong? Its not a tie rod or anything, cause everything in the front is new, and i checked for that anyway. The only thing that isnt new in the front is the steering box. Also if I do need a different one, are some better than others? Like a camaro?? Are they the same up into the 90s???

sc racing
Posts: 1773
Joined: Sun Jun 11, 2006 1:45 pm
Location: Sahuartia Az

Re: Chevelle steering box

#2 Post by sc racing » Sat Oct 02, 2010 6:28 pm

Its probably worn you can get them rebuilt but you can get a lighter Vega style from Flaming River or Borgeson.A lot of GM Saginaw boxes will interchange they might have different ratios so check into that before swapping one.

Post Reply

Who is online

Users browsing this forum: No registered users and 53 guests