DragStuff

I don't have access to a press, so what is the easiest way to install new wheel studs on my rotors?

I was told I can simply knock out the original ones (which are short studs) and slide the new ones in, put a washer and nut on the other side and tighten up the nut and pull them on.

Yes/ No?

Bruce69Camaro wrote:I don't have access to a press, so what is the easiest way to install new wheel studs on my rotors?

I was told I can simply knock out the original ones (which are short studs) and slide the new ones in, put a washer and nut on the other side and tighten up the nut and pull them on.

Yes/ No?

Here's what I did... Anti-seize, a long lug nut and my impact wrench.

That was my plan......

Thanks Harry.

You camaro owner's are something else.
I, as a Nova owner have a press.

I, as a Camaro owner wants to know, what's your point

Us Camaro owners also have something you don't, a paint job

OHHHHHHH busted

Your good! Thanks for reminding me.

Mine might be painted but you got one thing over me, mine will never be as fast, and you can take that one to the bank!

Oh and I just found out I got access to a press, so my worries are over.

Ah good. It will be alot easy're.

Mine hasn't gone fast yet. But it's only a matter of time.

supernova wrote:Ah good. It will be alot easy're.

Mine hasn't gone fast yet. But it's only a matter of time.

Easy, easy. Yours had gone as fast as mine will ever be.

Rodney King just called.

He wanted to know if you guys could just get along...............

HPDRIFTER wrote:Rodney King just called.

He wanted to know if you guys could just get along...............

LOL!!!!!

chris your post count makes for a good year
Joined: Sat Feb 02, 2008 5:35 pm
Posts: 1967
Location: Ft.Worth Tx

So *now* we know who is more chatty...

Supernova

Joined: Sat Feb 02, 2008 5:35 pm
Posts: 1967
Location: Ft.Worth Tx

Wikd69

Joined: Sat Feb 23, 2008 10:42 am
Posts: 1474
Location: Rocklin, CA

Sometimes doing the Right thing isnt always doing the right thing.

I want to know what's the problem here?

I started a post about wheel studs and right away, as normal this NOVA guy, whom must have my scent, comes along and highjacks my thread and runs away with it.

Now Rodney King is involved, who's next, the Al Sharp?

Next thing you know he's going to be saying that we're all a bunch of wannabe's, heads up, test-n-tune racers, that don't no chit, have done nothing and will never be as fast as his NOVA is.

Oh yea, Chris1320Racer, have a nice day and make sure that if you can't see the blades spinning, you don't climb up on a ladder to see where they are at

Supernova
Joined: Sat Feb 02, 2008 8:35 pm
Posts: 1968 You Post Whore.......
Location: Ft.Worth Tx

Bruce69camaro
Joined: Thu Jul 23, 2009 11:07 am
Posts: 795
Location: PA