Anti-roll bar?

Suspension Tuning, Troubleshooting, Design and Discussion

Moderators: David Lemmond, Dave Morgan

Post Reply
Message
Author
csvette3023
Posts: 30
Joined: Fri Dec 09, 2005 6:35 pm

Anti-roll bar?

#1 Post by csvette3023 » Wed Jun 20, 2007 2:05 pm

Looking for feedback on what type / brand of anti-roll bar is the best. Splined bar? Tube type? Welded arms?
I have to keep it under the trunk floor, stock rear frame rails.
Thanks in advance. --matt
Matt Beumer
70 B/S 402/375 Nova
N.H.R.A./I.H.R.A.

"STICK STOCKERS ARE WAY COOL!"

race9899
Posts: 153
Joined: Thu Aug 17, 2006 9:11 pm

Re: Anti-roll bar?

#2 Post by race9899 » Wed Jun 20, 2007 4:11 pm

csvette3023 wrote:Looking for feedback on what type / brand of anti-roll bar is the best. Splined bar? Tube type? Welded arms?
I have to keep it under the trunk floor, stock rear frame rails.
Thanks in advance. --matt

Splined arms are not bad but limited on availability of diameters and thicknesses

Welded arm antiroll bars are pretty much your best best. If the tube you are using is fine for the HP level you are then step up later, just slide in another tube and weld it in,

The Anti roll bar I use in Todd Kitchens car is three pieces of tube welded together.

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests