my trailer is in need of new wood flooring.
what kind of wood is used for open car trailors?
would treated wood be ok?
or someone had mentioned to me something about some sort of hard wood.
I'm also thinking of getting some sheets of aluminum diamond plate,but what thickness would I get?
.125?
or thicker?
open trailer question
Moderator: John_Heard
open trailer question
Rich
-----------------------------------------
heres a vid of my '77 chevy
http://blip.tv/file/571382
www.saginawstreetandstrip.com
http://community.webshots.com/user/dickschneerracing
-----------------------------------------
heres a vid of my '77 chevy
http://blip.tv/file/571382
www.saginawstreetandstrip.com
http://community.webshots.com/user/dickschneerracing
Re: open trailer question
Rich, most of the time everyone uses treated, mainly because open trailers tend to sit out in the elements alot more.
I know I've put new decks on 3 trailers for friends and they've all chosen treated boards. I know when I had my open trailer it came with just regular pine boards, as soon as I had a chance I ripped them out and put in 2" x 10"' treated lumber. As far as the aluminum the .125 or 1/8" would be fine for runners if that's what your thinking. Good luck!
I know I've put new decks on 3 trailers for friends and they've all chosen treated boards. I know when I had my open trailer it came with just regular pine boards, as soon as I had a chance I ripped them out and put in 2" x 10"' treated lumber. As far as the aluminum the .125 or 1/8" would be fine for runners if that's what your thinking. Good luck!
Re: open trailer question
Over time 1/8 aluminum diamond plate will sag at the point where the car sits, in other where thr tires are on the trailer. The weight of the car bouncing down the road on the trailer is why it happens.
If you do in diamond plate do it in 1/8 steel, it's stronger and cheaper. You might even want to brace under the floor where the car sits on the trailer.
Just my 2 cents
If you do in diamond plate do it in 1/8 steel, it's stronger and cheaper. You might even want to brace under the floor where the car sits on the trailer.
Just my 2 cents
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
-
- Posts: 329
- Joined: Wed Oct 29, 2008 7:14 pm
- Location: New Jersey
Re: open trailer question
Do you have a lumber mill close to you??? If so you can get some rough cut lumber but get a hard wood like Maple or oak and treat it your self.
Treated lumber only keeps the bugs from eating it it does nothing from keeping it from rotting like ever body thinks
Treated lumber only keeps the bugs from eating it it does nothing from keeping it from rotting like ever body thinks
- Trailerpro
- Posts: 10
- Joined: Thu Nov 19, 2009 1:58 pm
- Location: Oklahoma City, OK
- Contact:
Re: open trailer question
If you get non-treated, just get some linseed oil and "mop" it on the floor - usually 2 or 3 coats. It has worked for the decks of ships for years and years, and has been great on trailers too! Cheapest treatment you can get.
Re: open trailer question
I just redecked my open trailer and used pressure treated 2x10's. Worked great.
I had asked around and alot of people suggested Douglas Fir with a few oil coatings.
Treated is much easier and cleaner.
I had asked around and alot of people suggested Douglas Fir with a few oil coatings.
Treated is much easier and cleaner.
1974 Pontiac Ventura, 455P (9.5:1 comp.), 850DP, 3100 ''Tight'' 10'', 3.73's/28x13.5
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
Who is online
Users browsing this forum: No registered users and 5 guests