MSD Starter Saver with 6AL

MSD Digital Ignition Programming & Troubleshooting, Playing with Dots, Slew and other fun toys for traction challanged racers

Moderator: John_Heard

Post Reply
Message
Author
User avatar
hugger73hatch
Posts: 360
Joined: Sun Oct 21, 2007 10:42 pm

MSD Starter Saver with 6AL

#1 Post by hugger73hatch » Sat Nov 01, 2008 8:24 pm

Ok, first time to track since wiring the starter saver to my 6AL. I noticed today the tach was jumping around a bit. It never did this before I put the starter saver on the car. Anyone have any ideas?
73 Nova Hatchback, 408 Small Block 13-1, Iron Heads, 6.972 @ 98.362, 1.468 60', 3450 lbs, still tuning
28 x 9 Slick, N/A

http://www.esquireservices.net

User avatar
hugger73hatch
Posts: 360
Joined: Sun Oct 21, 2007 10:42 pm

Re: MSD Starter Saver with 6AL

#2 Post by hugger73hatch » Sun Nov 02, 2008 5:51 pm

May have found my problem. I was running a different plug than before. Normally run a projected tip, the plugs I have in it are not. Somehow I got my numbers crossed up. I had AR134 in it, should have had an AR13. Will let everyong know for sure.
73 Nova Hatchback, 408 Small Block 13-1, Iron Heads, 6.972 @ 98.362, 1.468 60', 3450 lbs, still tuning
28 x 9 Slick, N/A

http://www.esquireservices.net

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests