Page 1 of 1
MSD Crank Trigger Setup and Rotor Phasing
Posted: Mon Oct 24, 2011 1:15 pm
by John_Heard
Hey Guys - just put up a new tech article on how to setup a crank trigger, phase the rotor, etc.
http://www.dragstuff.com/techarticles/m ... setup.html
Anyone have anything else to add to this let me know please.
Re: MSD Crank Trigger Setup and Rotor Phasing
Posted: Mon Oct 24, 2011 5:18 pm
by HPDRIFTER
Thanks, John!
I needed that.............
Re: MSD Crank Trigger Setup and Rotor Phasing
Posted: Tue Oct 25, 2011 1:01 am
by wikd69
Perfect timing, John. I'm gonna finish up my crank trigger install here fairly soon and this will really be a help, thanks :)
Re: MSD Crank Trigger Setup and Rotor Phasing
Posted: Tue Oct 25, 2011 7:07 am
by John_Heard
Glad you guys found it useful, that was the whole idea.
Re: MSD Crank Trigger Setup and Rotor Phasing
Posted: Thu Oct 27, 2011 9:23 pm
by BracketNova
Didn't know to I was supposed to lead the rotor a bit. I have been lining them up straight.
Thanks John
Re: MSD Crank Trigger Setup and Rotor Phasing
Posted: Thu Oct 27, 2011 9:34 pm
by John_Heard
MSD has a video on their Video Channel showing what the spark does, that might help explain it better. Basically the spark jumps from the leading edge of the rotor to the closest ground, which will be the side of the cap that it's approaching.
http://www.msdvideos.com/video/15196
Re: MSD Crank Trigger Setup and Rotor Phasing
Posted: Fri Mar 02, 2012 5:07 pm
by jmarkaudio
One thing to consider when phasing the distributor with a crank trigger is if you run a substantial timing retard for nitrous or ???, you want to phase it in between the advanced and retarded point, and I might lean it toward where the timing spends the most time. Otherwise it you have it set for one or the other it will have to jump a very large gap part of the time.