Converter???

One of the most critical areas of a automatic race car

Moderator: Marty Chance

Post Reply
Message
Author
bracketracer
Posts: 329
Joined: Wed Oct 29, 2008 7:14 pm
Location: New Jersey

Converter???

#1 Post by bracketracer » Sat Nov 13, 2010 5:36 pm

Marty, Anyone :scratch: ....Finally was able to make a few passes with new motor and a converter from Marty :smt003 ...Any way it's showing 7% slip in the quarter but I do need to take the 4.56 out and put the 4.30s back in there as it's over 8000rpm at the stripe....How will this affect the slip???
I will post some log files it needed...Thanks guys

Image

User avatar
Marty Chance
Posts: 193
Joined: Fri Sep 19, 2008 6:34 am
Location: Cheney, KS

Re: Converter???

#2 Post by Marty Chance » Tue Nov 16, 2010 5:00 pm

it will increase the slippage , but will bring the rpm down some also
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com

bracketracer
Posts: 329
Joined: Wed Oct 29, 2008 7:14 pm
Location: New Jersey

Re: Converter???

#3 Post by bracketracer » Tue Nov 16, 2010 6:07 pm

Marty, that was only the 2nd pass on that motor and went 8.13@169mph..No juice just gas and the logger shows 7% slip..Just how much slip am I looking for and how much will it increase?? It's getting cold here so I may not be able to get out again till next year....So do you think stall change should be made to the converter?? Thanks

User avatar
Marty Chance
Posts: 193
Joined: Fri Sep 19, 2008 6:34 am
Location: Cheney, KS

Re: Converter???

#4 Post by Marty Chance » Wed Nov 17, 2010 6:52 am

if you are adding nitrous we need to tighten the converter. Give me a call and i can pull the blue print on your converter and go over exactly how you want to run the car and tune the converter to what you need it to do. Marty 316-542-9869 mon-thurs 5am to 5pm
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com

bracketracer
Posts: 329
Joined: Wed Oct 29, 2008 7:14 pm
Location: New Jersey

Re: Converter???

#5 Post by bracketracer » Thu Nov 18, 2010 4:53 am

Marty, Not adding any NOS and this is a bracket car..I will give you a call this morning...Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest