shiming a bolt together
Moderator: Marty Chance
shiming a bolt together
i took my neal chance bolt together apart and i never counted how many shims i had on the drive cover.I no i had 2 shims and 1 bearing between the stator and the turbine, so what should i have on the drive cover with the bearing.thanks
Last edited by uwilose on Wed Dec 08, 2010 8:16 pm, edited 1 time in total.
-
- Posts: 329
- Joined: Wed Oct 29, 2008 7:14 pm
- Location: New Jersey
Re: shiming a bolt together
If it's a Chance converter and you never took it apart call Marty he will be able to tell you what shims should be where
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: shiming a bolt together
FAQ on NCRC's site at http://www.racingconverters.com/assembl ... tions.html should show you what you need. Marty's at PRI in Florida right now, they'll be back in the shop next week sometime.
My 1971 X275 Nova | Facebook
-
- Posts: 193
- Joined: Fri Sep 19, 2008 6:34 am
- Location: Cheney, KS
Re: shiming a bolt together
Sorry it has taken so long to reply. Give me the serial number on the converter and i will pull the original blue print (these are kept on record for every Neal Chance converter ever built)
thanks Marty
thanks Marty
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com
Who is online
Users browsing this forum: No registered users and 8 guests