street hp jet size

Message

jaspermaggie · #1 Post by **jaspermaggie** » Tue Apr 08, 2008 6:24 pm

does anyone know what size jets the 750 vac street hp comes with.

vegaracer · #2 Post by **vegaracer** » Tue Apr 08, 2008 7:03 pm

If its the 82750, it has 75 primary's and 76 secondary's. (vacuum secondaries)
If its the 82751, it has 75 primary's and 80 secondary's. (mechanical secondaries)

The rest of the stock stuff is on page 11 here.
http://www.holley.com/data/Products/Tec ... 0319-2.pdf

jaspermaggie · #3 Post by **jaspermaggie** » Wed Apr 09, 2008 9:27 am

thank you

sunman · #4 Post by **sunman** » Mon Apr 14, 2008 7:29 am

OK, how bout 2 450's on a 406 w/tunnel Ram, aprox 600hp

no_bite · #5 Post by **no_bite** » Mon Apr 14, 2008 11:53 am

...huh... ??

vegaracer · #6 Post by **vegaracer** » Mon Apr 14, 2008 4:41 pm

If they are the marine carbs, should be 59's all the way around.
Part Number 0-80364

jaspermaggie · #7 Post by **jaspermaggie** » Tue Apr 15, 2008 9:28 am

I have a 750 vac setup frum SMI it has the tower but chock is removed and I use a K&N stub stack. Doyou think I will get more power from going to a hp vac with same jet size?