I recall somewhere on here, a thread about pluming a single pump for both the carb and the NOS. I am not having much luck with the search though.
I am building a mild sbc pump gas engine for my newest LUV. Street driven, and very rarely (if ever) will I use the NOS. I can't leave home without it though, lol...
Since I will rarely use it, I don't want to run a second dedicated pump...
I have nothing yet, but a pump, a 275 MagnaFuel. So what is needed, a fuel maifild, 2 port, 4 port, bypass? Thanks.
plumbing a fuel system
Moderator: John_Heard
plumbing a fuel system
Trucks are for haulin...
Re: plumbing a fuel system
The simplest setup would be a large line from the pump to the engine bay, then split to two Holley dead-head regulators. You can use a Y fitting or a fuel log/manifold to split the flow. You could build the log out of brass fittings from your local NAPA for pretty reasonable. Plenty of people using non-return systems with success.
Craig Watson
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
Re: plumbing a fuel system
Thanks for the info. I have no problem with doing as return as it currently has no plumbing. Just trying to figure out the best approach...
Trucks are for haulin...
Who is online
Users browsing this forum: No registered users and 16 guests