Best combo

General Engine Discussion

Moderator: John_Heard

Post Reply
Message
Author
chevelle717
Posts: 1
Joined: Tue Feb 10, 2015 2:47 pm

Best combo

#1 Post by chevelle717 » Tue Feb 10, 2015 3:44 pm

I have a 71 chevelle with a 350. bored 30 over. 194 double hump heads which I have worked. they're angle milled and what not. I have a Holley 650 dp carb, Holley contender intake, crane fireball cam. I have a victor jr and a Holley 750 vs on the shelf. would that make a better combo with that cam? also has 456 gears. I run the 1/8th mile

bracketchev1221
Posts: 158
Joined: Fri Oct 11, 2013 7:59 pm
Location: Mountville PA

Re: Best combo

#2 Post by bracketchev1221 » Wed Feb 11, 2015 5:28 am

For that motor, I think the 650 and contender would be the better set up. The motor is a low rpm engine and the smaller intake and carb will help the low end torque. If you want, you could try the 750 on the contender.

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests