SB2 engine build

General Engine Discussion

Moderator: John_Heard

Post Reply
Message
Author
User avatar
69434
Posts: 34
Joined: Mon Jul 22, 2013 4:04 pm
Location: Oklahoma

SB2 engine build

#1 Post by 69434 » Mon Feb 23, 2015 2:08 pm

Bought some SB2.2 heads & want to build a N/A 1000hp engine with a single carb, this is a build to be done sometime next year.
Has anyone ever done this or can it even be done?
'69 Camaro-N/A-23°-SBC-2988#
Best 1/8 mile pass 5.753 @ 119.92
http://www.dragzine.com/news/homebuilt- ... -1969-z28/

User avatar
John_Heard
Site Admin
Posts: 5684
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: SB2 engine build

#2 Post by John_Heard » Tue Feb 24, 2015 5:09 pm

Have you had the heads flow tested, or have any other data on them? Flow numbers should give you an indication what HP levels they can support assuming everything else is working together.

User avatar
69434
Posts: 34
Joined: Mon Jul 22, 2013 4:04 pm
Location: Oklahoma

Re: SB2 engine build

#3 Post by 69434 » Wed Feb 25, 2015 8:11 am

Going to have the heads flowed today, hoping for at least 420cfm.
Dart IE 9.325 deck, 454ci, 4.185 bore, 4.125 stroke, 6.25 rods, 1.0 CH pistons.
'69 Camaro-N/A-23°-SBC-2988#
Best 1/8 mile pass 5.753 @ 119.92
http://www.dragzine.com/news/homebuilt- ... -1969-z28/

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest