402 SBF Dart/Cleveland, need advice

General Engine Discussion

Moderator: John_Heard

Post Reply
Message
Author
blownhorse
Posts: 1
Joined: Wed Nov 08, 2006 9:42 pm
Location: Texas

402 SBF Dart/Cleveland, need advice

#1 Post by blownhorse » Thu Nov 09, 2006 11:53 am

Building an 800hp blown engine for a 73' mustang. Using a 4.125 bore Dart block with a 9.2 deck ht. and Cleveland mains. The crank is a forged 3.75 stroke with 6.00 forged rods and forged custom pistons. The heads are Air Flow dynamic (AFD) aluminum 4v cleveland type with 2.192 intake and 1.74 exhaust. The blower is a BDS large bore 671. Has anyone had any experience with Ford Performance Solutions (Anaheim, Ca.) as an engine builder? Anyone have any experience with AFD (Australian) aluminum heads? Any advice on this engine combination? Any help is appreciated.
blownhorse
Top
sc racing
Posts: 1773
Joined: Sun Jun 11, 2006 1:45 pm
Location: Sahuartia Az

#2 Post by sc racing » Thu Nov 09, 2006 9:14 pm

?
Top
speedracer119
Posts: 67
Joined: Wed Jul 05, 2006 11:38 am

#3 Post by speedracer119 » Fri Nov 17, 2006 3:08 pm

you could try calling mike at mike's machine shop in topeka KS. he might be able to help you. 785-233-1252
mikes machine shop 785-233-1252
Top
Post Reply

Return to “Engine”

Who is online

Users browsing this forum: No registered users and 3 guests