I need to find out what the dimensions are for NX style jets, I don't have any of that brand to measure. Anyone have one they could get me the outside diameters, Overall length and step length?
Thanks - John
NX Jet Diameters?
Moderator: John_Heard
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
John,
Here are the dimensions (inches). I measured two jets and included both measurements:
Overall length = 0.368 / 0.369
Length of head = 0.195 / 0.198 (estimated)
Shaft diameter = 0.185 / 0.187
Head diameter = 0.311
I estimated the head length because I coundn't find my calipers. I can take one to work tomorrow and measure it if you need an accurate dimension. Let me know if you need anything else.
Ken
Here are the dimensions (inches). I measured two jets and included both measurements:
Overall length = 0.368 / 0.369
Length of head = 0.195 / 0.198 (estimated)
Shaft diameter = 0.185 / 0.187
Head diameter = 0.311
I estimated the head length because I coundn't find my calipers. I can take one to work tomorrow and measure it if you need an accurate dimension. Let me know if you need anything else.
Ken
69 Nova 408 SBC
Best to date: 10.241 @ 128.36 mph 1.404 60ft.
Best to date: 10.241 @ 128.36 mph 1.404 60ft.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Who is online
Users browsing this forum: No registered users and 6 guests