nitrous jet calculater,
Moderator: John_Heard
nitrous jet calculater,
are these jet calculators close like the one on cold fusions web site and on ny-trex.com web site are a good starting point for a plate set up...
I've never tried the one at ny-trex.com before but I have used the one at Cold fusion for my fogger jets and it is very very close. I suspect it would be the same for a plate system since it asks for the number of jets.
Ron
71 Nova - 3300lbs, stock suspended on a 275
5.35 132MPH in the thin Colorado air
71 Nova - 3300lbs, stock suspended on a 275
5.35 132MPH in the thin Colorado air
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Dave Koehler's Nitrous Master software is a tool I've grown to find very handy. Dave's a forum member and stops by from time to time, highly recommended -
http://www.koehlerinjection.com/Koehler ... master.htm
http://www.koehlerinjection.com/Koehler ... master.htm
My 1971 X275 Nova | Facebook
John_Heard wrote:Dave Koehler's Nitrous Master software is a tool I've grown to find very handy. Dave's a forum member and stops by from time to time, highly recommended -
http://www.koehlerinjection.com/Koehler ... master.htm
X2!! Very good program!!!
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
Make that X's 3. It's a very useful tool for any nitrous guy, starting out or advanced.John_Heard wrote:Dave Koehler's Nitrous Master software is a tool I've grown to find very handy. Dave's a forum member and stops by from time to time, highly recommended -
http://www.koehlerinjection.com/Koehler ... master.htm
Who is online
Users browsing this forum: No registered users and 51 guests