i know you guys got the answer.
i am installing a NOS supershot and am planing on using the 150hp jets. my question is how big does the fuel line need to be? is -4 to small? i tried to size it for -5 but couldnt find any an fittings for that. and -6 looks kinda akwardly big. the port size in the solenoid is only 1/8" so a -4 should be plenty...right?
thanks in advance.
got an assembly question
Moderator: John_Heard
- Scott Coxwell
- Posts: 31
- Joined: Thu Aug 14, 2008 4:56 pm
- Location: Waynesboro, MS
- Contact:
Re: got an assembly question
hook you up a good pressure gauge just before the solenoid and fire it and set your flowing fuel pressure and you will know strait off, but I would say yes as long as you have a decent fuel pump and the fuel line is not tooooo long
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: got an assembly question
Yes, a -4 will work just fine. If you were running a 200 shot, I can tell you a -5 would move just slightly more fuel than the -4 at the same psi, but not enough to be of any concern.
The -4 has more than enough capacity for a 150 shot.
The -4 has more than enough capacity for a 150 shot.
My 1971 X275 Nova | Facebook
Re: got an assembly question
Ah , but what happens when the addiction takes you to higher planes?
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Who is online
Users browsing this forum: No registered users and 22 guests