retard trubble

General Nitrous Discussion

Moderator: John_Heard

Post Reply
Message
Author
dannyman
Posts: 76
Joined: Tue Feb 17, 2009 8:10 pm

retard trubble

#1 Post by dannyman » Fri Feb 27, 2009 10:35 pm

had it all working good added a fuel safty switch that killed the ground when the master switch is off so there isnt a ground in the windings of the solenoids to cut the retard off the retard wire runs to the hot side of the noids so when i hit the button it breaks the ground and cuts it back where do i run the retard wire now

nitrousdave
Posts: 25
Joined: Mon Nov 24, 2008 6:53 pm

Re: retard trubble

#2 Post by nitrousdave » Sat Feb 28, 2009 8:51 pm

Are you using a relay for the nitrous?

dannyman
Posts: 76
Joined: Tue Feb 17, 2009 8:10 pm

Re: retard trubble

#3 Post by dannyman » Sun Mar 01, 2009 10:16 am

no i havent used it yet i dont have a relay do i need one
nitrousdave wrote:Are you using a relay for the nitrous?

nitrousdave
Posts: 25
Joined: Mon Nov 24, 2008 6:53 pm

Re: retard trubble

#4 Post by nitrousdave » Mon Mar 02, 2009 5:23 am

It is always a good idea to use one with nitrous and if you did it would solve your problem. Put the FPSS on the coil side of the relay and then put the retard wire on the solenoid hot wire like you had it before.

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests