cross plate noise
Moderator: John_Heard
cross plate noise
i have put my cross plate on the motor and it makes a whistle type noise just as i come of idle.. definitely the plate as if i remove it the noise stops.. any ideas how to stop this
Re: cross plate noise
Possibly a bad gasket cause a vacuum leak? Plate not flat? Spray bars leaking where they meet the plate?
Craig Watson
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
Re: cross plate noise
new gaskets top and bottom,, plate seems flat with a straight edge.. will check the spraybar where it joins the plate
Re: cross plate noise
checked the spraybars and they seem fine
Re: cross plate noise
zephyrc wrote:checked the spraybars and they seem fine
Spray a little WD around it when you hit the spot it'll probably shut up momentarily.
Roger
585R10
Who is online
Users browsing this forum: No registered users and 55 guests