DragStuff

Where can I find an 1/8" to 1/8" npt 45 degree fitting ??? Need to angle my solenoid for clearance!!!
Thanks

If you're looking for brass, I would bet McMaster Carr stocks it - http://www.mcmaster.com/

John_Heard wrote:If you're looking for brass, I would bet McMaster Carr stocks it - http://www.mcmaster.com/

CANT FIND ONLINE THERE EITHER....

Grainger has them, but I can only find them in a 10 pack.

http://www.grainger.com/Grainger/Street ... Pid=search

Mcmaster has these

http://www.mcmaster.com/#brass-pipe-str ... ws/=c93ndi

I have a grainger close to the house and buy most stuff from there. If they don't have it they always get it the next morning.

dcw9360 wrote:

John_Heard wrote:If you're looking for brass, I would bet McMaster Carr stocks it - http://www.mcmaster.com/

CANT FIND ONLINE THERE EITHER....

Go find your local Ace Hardware store. Around here they have a far better selection on nuts and bolts and fitting than most other places, at least in this area. Thats where I get all my stainless and grade-8 stuff as well as a lot of my brass fittings.