BANKING NITROUS
Moderator: John_Heard
BANKING NITROUS
Are there any wiring diagrams on how this is done?
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: BANKING NITROUS
I don't think we have any on this site, you're just going to wire it up like two separate kits left bank / right bank, or front 4 / back 4 depending on how you have it plumbed. There would just be a timer for both stages, or a progressive setup that way.
My 1971 X275 Nova | Facebook
Re: BANKING NITROUS
Thanks Mr. Heard,but i have tried wiring this digiset up 3 or 4 different ways and it will not turn the pass. side bank on.I am using the power grid 7730 is there a way to use it to activate the other bank?I'm using a single fogger.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: BANKING NITROUS
There are many ways to do all that. You'll have to describe what you're wanting to do here. Are you turning the first bank on at the hit (no timer), then using the digiset to bring in the second one? Are you using a progressive?
Is the first bank working like it's supposed to, but only problem can't get the timer to activate the 2nd?
Is the first bank working like it's supposed to, but only problem can't get the timer to activate the 2nd?
My 1971 X275 Nova | Facebook
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: BANKING NITROUS
Also - are you running a relay on the output of the digiset timer? Is it activating?
My 1971 X275 Nova | Facebook
Re: BANKING NITROUS
Yes i am running a relay on the timer.I'm turning the first bank on at the hit (no timer)and i was wanting to turn the second bank on using the timer or the power grid whichever is easier.The first bank is working properly it's just the second one that won't come on at all.
Re: BANKING NITROUS
I did a search and found a wiring diagram from this site and wired it and it still won't come on.I'm wondering if the timer might be bad.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: BANKING NITROUS
I suppose it's possible, you might bypass the timer and see if everything else works down stream of it (relay, solenoids, etc.).
My 1971 X275 Nova | Facebook
Re: BANKING NITROUS
Mr.Heard i found the problem it was a bad connection the diagram was spot on and everything is working fine.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: BANKING NITROUS
Good deal - great when things start working like they're supposed to!
My 1971 X275 Nova | Facebook
Who is online
Users browsing this forum: No registered users and 59 guests