nitrous filter

Message

a1elec · #1 Post by **a1elec** » Sat Mar 03, 2007 1:40 pm

are you guys running inline filters on gas and nitrous solinoids? thanks john

rustbucket · #2 Post by **rustbucket** » Sat Mar 03, 2007 5:01 pm

I use a 1 gallon cell, through a 140 gph pump, through a canister type filter then regulator to the fuel solinoids.
no filter no n20

#3 Post by **John_Heard** » Sat Mar 03, 2007 5:13 pm

No filters on the solenoids for me. Nitrous is filtered going into the bottle, fuel is filtered going into the tank and an inline filter too.

Craig W. · #4 Post by **Craig W.** » Sat Mar 03, 2007 10:05 pm

I filter the nitrous when refilling my bottles.

I do have a filter on the fuel line.

a1elec · #5 Post by **a1elec** » Sun Mar 04, 2007 6:19 pm

craig, sounds like you refill your own bottles. what kind of setup do you have and how do you like it?

a1elec · #6 Post by **a1elec** » Sun Mar 04, 2007 6:20 pm

craig, sounds like you refill your own bottles. what kind of setup do you have and how do you like it?

Racer704 · #7 Post by **Racer704** » Sun Mar 04, 2007 7:55 pm

Inline filters dont work well with nitous solinoids as it will act like a oriface tube like in A/C on a car...It can cause major phase change in the nitrous.

Craig W. · #8 Post by **Craig W.** » Sun Mar 04, 2007 9:36 pm

Very simple setup. Just a big mother bottle, a short run of braided line with a filter and a cheapo scale. I chill the bottles in the fridge overnight, heat my mother bottle with a 540w blanket heater and fill the bottles with them on the scale.

Right now, I'm having to lay the mother bottle on its side, but I'm going to make a stand to turn it all the way upside down if I can ever get some time. Wish it had a dip tube.

#9 Post by **John_Heard** » Sun Mar 04, 2007 9:56 pm

Craig Dave Koehler has a stand for sale he wants $60 for it.

Craig W. · #10 Post by **Craig W.** » Sun Mar 04, 2007 10:09 pm

That's not too bad a price I guess. Got an e-mail address for him? Thanks.

#11 Post by **John_Heard** » Sun Mar 04, 2007 10:30 pm

He's a board member - http://www.dragstuff.com/phpBB2/profile ... file&u=148

Dave Koehler · #12 Post by **Dave Koehler** » Thu Mar 08, 2007 8:03 pm

Ask and ye shall receive.

http://www.koehlerinjection.com/Koehler ... esale1.htm

Dave Koehler
www.koehlerinjection.com

Craig W. · #13 Post by **Craig W.** » Thu Mar 08, 2007 8:12 pm

Hey Dave, would $50 by the mother bottle stand?

Thanks.

nitrous filter

nitrous filter

Who is online