reverse relay
Moderator: John_Heard
- stracer859
- Posts: 132
- Joined: Thu Jun 16, 2005 9:30 pm
reverse relay
need to know how to wire it up so that when i let off the transbrake the nitrous comes on??
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
I just use one of those little cube relays and run the nitrous activation wire (same one that runs through the carb switch) through the normally closed contacts on the relay. Then wire the coil of the relay to the transbrake solenoid hot wire so when the trans brake is on, the relay comes on, which breaks the circuit for the nitrous.
If that don't make sense let me know I'll see if I can sketch up a diagram.
John
If that don't make sense let me know I'll see if I can sketch up a diagram.
John
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Who is online
Users browsing this forum: No registered users and 26 guests