Spark Plug wires

Message

79 Camaro · #1 Post by **79 Camaro** » Tue May 22, 2007 12:12 pm

Hey guys,
I have a big block chevy with a Accel Billitech distributer and a 7al2 MSD box. I have been looking for a set of good wires to replace the Taylor Wires that I have had on my motor for quite some time. But they have to have 45* angle boot on the bottom that plugs on to the spark plug(header clearence). I was looking at the MSD Super conductors but I cannot find the right ones. Any help or suggestions would be greatly appreciated. I am not real picky on brand, I just want a good quality plug wire because I will be running nitrous soon.

Thanks
Adam

mytmouz · #2 Post by **mytmouz** » Tue May 22, 2007 12:41 pm

Accel makes a good one with the 135 boots.

79 Camaro · #3 Post by **79 Camaro** » Tue May 22, 2007 12:49 pm

I guess they just call them 135* instead of 45*? I always thought it was "straight" "45*" and "90*".... But I just know that they cant be straight or 90*. Can anyone hook me up a Part # for MSD, Taylor, and Moroso? What do you guys think is the best?

Bad67 · #4 Post by **Bad67** » Tue May 22, 2007 3:14 pm

msd claims there straight boots will bend to a 45*,iam am in the same situation i need a new set of plug wires i had taylor 8 mm and there not holding up to the header temps.

Bob West · #5 Post by **Bob West** » Tue May 22, 2007 7:15 pm

Why not get Taylor wires with 135* boots? Thats all I use anymore, I had a set of MSD wires blister on me.

sc racing · #6 Post by **sc racing** » Tue May 22, 2007 9:41 pm

I use Taylors on just about everything.I dont like Moroso wires the outer jacket always rips when you take them in and out of the wire loom.The MSD wires will bend but the boots are very long compared to the Taylor wires.Taylor makes a stainless boot cover if your boots are too close to the header you can try those or Jacobs Electronics has wires with a ceramic boot pricey though I think around $180.
Adam here are some MSD #s Universal "hei" type cap wuth multi angle boot 31183 (red) 31189 (black)
The premade kits are listed as (wires below header) not over the valve cover "hei" type # 35609 black
"points " type cap # 31603 red & 31609 black.
You can buy a universal ste and a set of 115* boots pn# 8853 they look like a 45* but are much shorter than the bendable type.
Man thats a lot of typing .I would still use the Taylors

Bad67 · #7 Post by **Bad67** » Tue May 22, 2007 9:53 pm

where can you get the stainless boot covers from taylor dont think i've ever seen them?you have a part # for them?

sc racing · #8 Post by **sc racing** » Tue May 22, 2007 10:06 pm

Actually the Taylors are aluminum(sorry)but MSD makes stainless sleeves for the boots good for 2500* they come 2 per pack and come with terminals and boots :90* #3328
135* # 3329 and straight # 3330 I cand find the Taylor #s now but Ill post them later.

sc racing · #9 Post by **sc racing** » Tue May 22, 2007 10:18 pm

I could only find a # for 90* boots Taylor # 2570

knockem out jon · #10 Post by **knockem out jon** » Wed May 23, 2007 4:19 am

i have bbc in a camaro and i use taylors "409" 135 degree plug
wires. they clear headers no problem.... and have a 10.4 mm
outside diameter... may require you to get new looms.

79 Camaro · #11 Post by **79 Camaro** » Wed May 23, 2007 4:56 pm

What is the part # for Taylor 409 Wires for a BBC Over the valve covers, 135*, Blue, Hei style cap? I cant find them in Jegs? I would like to order from Jegs or Summit.

sc racing · #12 Post by **sc racing** » Wed May 23, 2007 11:46 pm

PN#79632

knockem out jon · #13 Post by **knockem out jon** » Thu May 24, 2007 5:29 am

i show summit pn#79653?

sverbus · #14 Post by **sverbus** » Thu May 24, 2007 9:34 am

I like the MSD wires...but that might just me being a dork but I feel better having everything MSD...except the plugs that is

79 Camaro · #15 Post by **79 Camaro** » Thu May 24, 2007 12:05 pm

knockem out jon wrote:i show summit pn#79653?

Those, you have to put the ends on yourself.

I am pretty sure that SC is right, Thanks guys!

Spark Plug wires

Spark Plug wires

Who is online