Spark Plug wires
Moderator: John_Heard
Spark Plug wires
Hey guys,
I have a big block chevy with a Accel Billitech distributer and a 7al2 MSD box. I have been looking for a set of good wires to replace the Taylor Wires that I have had on my motor for quite some time. But they have to have 45* angle boot on the bottom that plugs on to the spark plug(header clearence). I was looking at the MSD Super conductors but I cannot find the right ones. Any help or suggestions would be greatly appreciated. I am not real picky on brand, I just want a good quality plug wire because I will be running nitrous soon.
Thanks
Adam
I have a big block chevy with a Accel Billitech distributer and a 7al2 MSD box. I have been looking for a set of good wires to replace the Taylor Wires that I have had on my motor for quite some time. But they have to have 45* angle boot on the bottom that plugs on to the spark plug(header clearence). I was looking at the MSD Super conductors but I cannot find the right ones. Any help or suggestions would be greatly appreciated. I am not real picky on brand, I just want a good quality plug wire because I will be running nitrous soon.
Thanks
Adam
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
I guess they just call them 135* instead of 45*? I always thought it was "straight" "45*" and "90*".... But I just know that they cant be straight or 90*. Can anyone hook me up a Part # for MSD, Taylor, and Moroso? What do you guys think is the best?
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
Why not get Taylor wires with 135* boots? Thats all I use anymore, I had a set of MSD wires blister on me.
72 Malibu-Nov. '08-1.329-3.995-6.280@106.94-9.988@131.62
best 60ft to date- 1.319
http://www.dragtimes.com/1972-Chevrolet ... -5251.html
best 60ft to date- 1.319
http://www.dragtimes.com/1972-Chevrolet ... -5251.html
I use Taylors on just about everything.I dont like Moroso wires the outer jacket always rips when you take them in and out of the wire loom.The MSD wires will bend but the boots are very long compared to the Taylor wires.Taylor makes a stainless boot cover if your boots are too close to the header you can try those or Jacobs Electronics has wires with a ceramic boot pricey though I think around $180.
Adam here are some MSD #s Universal "hei" type cap wuth multi angle boot 31183 (red) 31189 (black)
The premade kits are listed as (wires below header) not over the valve cover "hei" type # 35609 black
"points " type cap # 31603 red & 31609 black.
You can buy a universal ste and a set of 115* boots pn# 8853 they look like a 45* but are much shorter than the bendable type.
Man thats a lot of typing .I would still use the Taylors
Adam here are some MSD #s Universal "hei" type cap wuth multi angle boot 31183 (red) 31189 (black)
The premade kits are listed as (wires below header) not over the valve cover "hei" type # 35609 black
"points " type cap # 31603 red & 31609 black.
You can buy a universal ste and a set of 115* boots pn# 8853 they look like a 45* but are much shorter than the bendable type.
Man thats a lot of typing .I would still use the Taylors
-
- Posts: 16
- Joined: Mon Feb 05, 2007 9:24 am
What is the part # for Taylor 409 Wires for a BBC Over the valve covers, 135*, Blue, Hei style cap? I cant find them in Jegs? I would like to order from Jegs or Summit.
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
-
- Posts: 16
- Joined: Mon Feb 05, 2007 9:24 am
Who is online
Users browsing this forum: No registered users and 15 guests