3 step wiring
Moderator: John_Heard
3 step wiring
any one no a easy way to wire a 3 step to the trans break and electric shifter I dont really understand the directions that came with it
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
http://www.msdignition.com/pdf/8739_8737_frm22502.pdf
Module 2: This is the default module. It is active when no voltage is present
on the other wires.
Module 1: Active when 12 volts are applied to the Red Wire.
Module 3: Active when 12 volts are applied to the Blue Wire. (3-Step Only)
Note: If 12 volts are applied to the Red and Blue wires at the same time, Module 3 will be active.
Module 2: This is the default module. It is active when no voltage is present
on the other wires.
Module 1: Active when 12 volts are applied to the Red Wire.
Module 3: Active when 12 volts are applied to the Blue Wire. (3-Step Only)
Note: If 12 volts are applied to the Red and Blue wires at the same time, Module 3 will be active.
Who is online
Users browsing this forum: No registered users and 5 guests