Master cylinder help

Everything from the motor to the wheels

Moderator: John_Heard

Message
Author
Yellowchevelle
Posts: 129
Joined: Mon Aug 13, 2007 1:08 pm
Location: Salina, KS

Re: Master cylinder help

#16 Post by Yellowchevelle » Fri Nov 21, 2008 12:46 pm

Thanks for all the help guys! I ordered a chrysler style with an 1 1/32 bore (cardone pn 131822) this is supose to be a new master cylinder complete with reservoir. all the reman master cylinders were cast iron housings. just a little work with the brigeport and it will bolt right on ill post some pics when i get finished. The chevy stuff was ether to big or to heavy so thats why i went with the chrysler MC
Thanks again
Matt

Yellowchevelle
Posts: 129
Joined: Mon Aug 13, 2007 1:08 pm
Location: Salina, KS

Re: Master cylinder help

#17 Post by Yellowchevelle » Wed Nov 26, 2008 12:24 pm

I found an excelent place to order oddball fittings i ordered some for my chrysler MC so i dont have to use an adapter between the MC and the line. www.fedhillusa.com
Hope this helps someone!
Matt

Yellowchevelle
Posts: 129
Joined: Mon Aug 13, 2007 1:08 pm
Location: Salina, KS

Re: Master cylinder help

#18 Post by Yellowchevelle » Thu Nov 27, 2008 9:14 am

Not quite done yet but here are some pics
Attachments
11-25-08_2047.jpg
11-25-08_2048.jpg

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: Master cylinder help

#19 Post by John_Heard » Fri Nov 28, 2008 6:18 am

Hey Matt I'm going to add the PN you found for that master to our tech note page for master cylinders -http://www.dragstuff.com/techarticles/R ... CylPN.html - can you tell me what ports it had on it and what the application was?

Thanks - John

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests