What to check first?
Moderator: John_Heard
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
What to check first?
My trans went out Friday night circa the 330 mark. Made no noises at all, just felt like someone put it in neutral for me. I'm thinking pump...but wouldn't I hear something break? I'm assuming the best route is to find a pressure gauge and go from there. I have no forward gears or reverse. The valve body wasn't right when it was new...I had no reverse then. Could this be valvebody related?
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
- CDR Performance
- Posts: 147
- Joined: Tue Mar 02, 2010 7:41 pm
- Location: Indianapolis, Indiana
Re: What to check first?
Check the fluid and go from there. Some Trannys need to have the t-brake on to go into reverse.
CDR PERFORMANCE
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: What to check first?
It just has a sportsman brake not a pro. My friend thinks the planetaries are toast.
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Re: What to check first?
did you drop the pan ? It'd be interesting to see if you have any spare parts laying there...
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: What to check first?
Not yet, last time I tried to get the pan off I was beating on it with a dead blow to no avial. Then I figured out the leak I was chasing was the dipstick seal and put the bolts back in the pan and was on my way. So I'm not looking forward to another round. How hard can you pry on a cast aluminum pan???
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Re: What to check first?
Hmmm, dunno. I've learned to double-check I have all the pan bolts out before I break another pan. Er, I mean, before I try to remove the pan. LOLspaz109 wrote:Not yet, last time I tried to get the pan off I was beating on it with a dead blow to no avial. Then I figured out the leak I was chasing was the dipstick seal and put the bolts back in the pan and was on my way. So I'm not looking forward to another round. How hard can you pry on a cast aluminum pan???
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: What to check first?
Well there's some gold dust/flake type stuff in the pan...there was one tiny little piece of metal in there. Almost like a third of a thread of a 3/8 bolt? I ran a magnet through the drain pan of fluid and hardly anything stuck to the magnet. Will there be a bunch of metal inside the case? I would think it would get down to the pan if there was.
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: What to check first?
'twas the input shaft...
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Re: What to check first?
*ouch*
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
- Bruce69Camaro
- Posts: 1799
- Joined: Thu Jul 23, 2009 11:07 am
- Location: PA
Re: What to check first?
Double ouch.....
Was that a stock shaft or aftermarket one?
Man your sure having your share of bad luck this year, aren't you?
Ever get the carb issue straightened out?
Bruce
Was that a stock shaft or aftermarket one?
Man your sure having your share of bad luck this year, aren't you?
Ever get the carb issue straightened out?
Bruce
Those who think they know it all have no way of finding out they don't.........
Who is online
Users browsing this forum: No registered users and 27 guests