9" Rearend
Moderator: John_Heard
-
- Posts: 176
- Joined: Sat Sep 13, 2008 9:11 am
9" Rearend
Finally toasted my buick 9 3/8 ring gear sat after I just went 1.63 run before, and these rears don't have any aftermarket stuff ,so I am wanting to switch to a 9"... Now my car weighs 4550 with me in it so i need something that will hold up! Do U think the strange S case is strong enough or no? Making 560-580 hp and 600 ft lbs..leaving at 2500 on foot brake flashes to 4200..This is also still a street car so not sure if i want to go to a spool!.. also would run 35 spline axles... thanks guys!
74 Pontiac Grandville
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
Re: 9" Rearend
Call Brydon at QP, he can help you out with everything you need.
Here's he web site:
http://www.quickperformance.com/index.htm
Here's he web site:
http://www.quickperformance.com/index.htm
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
-
- Posts: 176
- Joined: Sat Sep 13, 2008 9:11 am
Re: 9" Rearend
Thanks!..
74 Pontiac Grandville
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
-
- Posts: 176
- Joined: Sat Sep 13, 2008 9:11 am
Update on 9" Rearend
well got the housing today along with the third member, Had A guy Named dave Bryan do it he owns raptor fab in nebraska, does alot of derby stuff. Back brace on it, upper ears are raised 1 1/2 from stock, will be using UMI Ultmate Adjustable uppers, big bearing ford ends, DOM Tubing , and a track 9 center section, internals are 35 spline Moser spool, Daytona pinion support, 1350 yoke and spicer joint, Moser 3.25 bearing case with 3.89 gears and 35 spline hobby stock axles!
74 Pontiac Grandville
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
Re: 9" Rearend
Wow, how'd Santa get that down the chimney ?
Thats a great looking setup
Thats a great looking setup
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: 9" Rearend
looks good Darby, I was wondering where you been I thought maybe you were at the track or working on your suntan
Re: 9" Rearend
Still have the rest of that rear?grandville455 wrote:Finally toasted my buick 9 3/8 ring gear set
Rob
'70 GS Stage 1, 466 BBB, 11:1,wiesco pistons, stock rod, ported Edelbrock heads, 1.55 rollers, single plain intake, 950 Quickfuel, aeromotive ss pump, TH400, 9" PTC converter, 3.90 12bolt, NOS Mini, NX Single entry Crossbar
'70 GS Stage 1, 466 BBB, 11:1,wiesco pistons, stock rod, ported Edelbrock heads, 1.55 rollers, single plain intake, 950 Quickfuel, aeromotive ss pump, TH400, 9" PTC converter, 3.90 12bolt, NOS Mini, NX Single entry Crossbar
-
- Posts: 176
- Joined: Sat Sep 13, 2008 9:11 am
Re: 9" Rearend
evil16v wrote:Still have the rest of that rear?grandville455 wrote:Finally toasted my buick 9 3/8 ring gear set
Hi yes I do..
Last edited by grandville455 on Sun Jan 02, 2011 9:44 am, edited 1 time in total.
74 Pontiac Grandville
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
-
- Posts: 176
- Joined: Sat Sep 13, 2008 9:11 am
Re: 9" Rearend
sc racing wrote:looks good Darby, I was wondering where you been I thought maybe you were at the track or working on your suntan
Thanks Steve!... Yea not much sun this time of the year,lol.. Did have the sled out a couple of times til we got rain and closed them back up
74 Pontiac Grandville
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
Re: 9" Rearend
How much for just the posi? Any Pics?grandville455 wrote:evil16v wrote:Still have the rest of that rear?grandville455 wrote:Finally toasted my buick 9 3/8 ring gear set
Hi yes I do..
Rob
'70 GS Stage 1, 466 BBB, 11:1,wiesco pistons, stock rod, ported Edelbrock heads, 1.55 rollers, single plain intake, 950 Quickfuel, aeromotive ss pump, TH400, 9" PTC converter, 3.90 12bolt, NOS Mini, NX Single entry Crossbar
'70 GS Stage 1, 466 BBB, 11:1,wiesco pistons, stock rod, ported Edelbrock heads, 1.55 rollers, single plain intake, 950 Quickfuel, aeromotive ss pump, TH400, 9" PTC converter, 3.90 12bolt, NOS Mini, NX Single entry Crossbar
-
- Posts: 176
- Joined: Sat Sep 13, 2008 9:11 am
Re: 9" Rearend
Would take 200 shipped.. this is the only pic i have when i pulled the cover too see what broke. I also have another posi with a ring gear attached that looks to be new or in very good condition, I would let that assembly go for $350
74 Pontiac Grandville
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
7.33- 1/8th @ 94.55/ 11.501 @117.74- 4550 pds
1.60 60 ft....all bests
74 Firebird 3580#
2016 1.377 60ft, 6.33@106.87- 10.02@ 132 mph
Who is online
Users browsing this forum: No registered users and 36 guests