Shifter Arms
Posted: Tue Jul 10, 2012 5:51 am
Ok, I'm going a little crazy over this crap, so hopefully some of you can help me?
This whole issue with my shifter adjustment got me worked up. The shifter adjusted just fine when I installed it, all we did was rebuild the tranny and now the shifter won't adjust properly.
I finally got it down to where I went against the instructions and listened to fellow racers and they told me to adjust the cable with the shifter and tranny in neutral. This worked for 1,2,N,R but it will not fully engage into park and in fact, I have to put it into neutral to start the car, it won't close the switch when in park.
So people claim it could be the two piece arm that B&M supplies and that I should use a one piece arm. Ok that's fine but whose's arm will work with a Pro Ratchet?
Another person thinks it could be the rooster comb........
Anyone have any suggestions on this? B&M is no help and in fact, I found out this is seems to have happened to a lot of other guys but I really never got a decent answer on what the problem was?
I don't like the feeling I get when I try to shift the car into park. You can feel the cable fitting you when you go to push it.
Thanks
This whole issue with my shifter adjustment got me worked up. The shifter adjusted just fine when I installed it, all we did was rebuild the tranny and now the shifter won't adjust properly.
I finally got it down to where I went against the instructions and listened to fellow racers and they told me to adjust the cable with the shifter and tranny in neutral. This worked for 1,2,N,R but it will not fully engage into park and in fact, I have to put it into neutral to start the car, it won't close the switch when in park.
So people claim it could be the two piece arm that B&M supplies and that I should use a one piece arm. Ok that's fine but whose's arm will work with a Pro Ratchet?
Another person thinks it could be the rooster comb........
Anyone have any suggestions on this? B&M is no help and in fact, I found out this is seems to have happened to a lot of other guys but I really never got a decent answer on what the problem was?
I don't like the feeling I get when I try to shift the car into park. You can feel the cable fitting you when you go to push it.
Thanks