What kind of alt mount for motor plate?
Moderator: John_Heard
What kind of alt mount for motor plate?
What kind of alt mount are you guys using with a motor plate? I have a BBc with CSR electric water pump and need to get a mount for the standard size alternator.I would like a mid mount on the passenger side. Any suggestion would be helpfull and pictures even better. Will also need a smaller pulley at the crank to keep the rpm's down at the alternator. What works well?
- Bruce69Camaro
- Posts: 1799
- Joined: Thu Jul 23, 2009 11:07 am
- Location: PA
Re: What kind of alt mount for motor plate?
I don't know if this will help but S&W sells an alternator kit for use with a front plate.
Check here: http://www.swracecars.com/Files/pdf/CATpg47.pdf
Even though it mentions it's for a Camaro/ Nova, you may want to ask them if it will fit for your needs.
I don't have a front plate but my brackets are made by Alan Grove Components and they also may be able to help you.
Bruce
Check here: http://www.swracecars.com/Files/pdf/CATpg47.pdf
Even though it mentions it's for a Camaro/ Nova, you may want to ask them if it will fit for your needs.
I don't have a front plate but my brackets are made by Alan Grove Components and they also may be able to help you.
Bruce
Those who think they know it all have no way of finding out they don't.........
Re: What kind of alt mount for motor plate?
East Coast Auto Electric , Jones and maybe Power Master
- Mike Peters
- Posts: 930
- Joined: Wed Oct 12, 2005 1:48 pm
- Location: Wichita, KS
Re: What kind of alt mount for motor plate?
Moroso part # 63833 is a pretty cool set-up for your CSR pump. Can be used to mount the alternator on either side.
http://www.jegs.com/i/Moroso/710/63833/ ... tId=953091
http://www.jegs.com/i/Moroso/710/63833/ ... tId=953091
"If winning was easy, losers would be doing it"
Re: What kind of alt mount for motor plate?
Anything can always be hot-rodded.
I've included some different picks when I was doing my own,
however I could not use a stock type housing because the
diameter was just too big-so I just used the East Coast
Auto Electric alternator and bracket and modified the bracket
to suit me--everyone is different and sometimes you have to
work out of the box.
These were some pics on the net I used coming up with my own idea.
I've included some different picks when I was doing my own,
however I could not use a stock type housing because the
diameter was just too big-so I just used the East Coast
Auto Electric alternator and bracket and modified the bracket
to suit me--everyone is different and sometimes you have to
work out of the box.
These were some pics on the net I used coming up with my own idea.
Re: What kind of alt mount for motor plate?
And one last one from East Coast Auto Electric.
This is there SBC and low mount.
This is there SBC and low mount.
Re: What kind of alt mount for motor plate?
this might be what I am looking for, went to motor plate last yr and charging battery as much as possible between rounds suckssg7365 wrote:And one last one from East Coast Auto Electric.
This is there SBC and low mount.
Re: What kind of alt mount for motor plate?
If you can live with it, the Shogun AC/DC generator/Altenator mounts up nicley on a plate.
Re: What kind of alt mount for motor plate?
I have the billet spec. but I am thinking about using the s&w set up. Thanks for asking, bc this helpped me as well.
1967 Camaro
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Who is online
Users browsing this forum: No registered users and 25 guests