Is that the new invisible paint I've been hearing about ?joe69Z wrote:Hrer's my 69' Camaro.
You and your ride... Post it here get to know everyone...
Moderator: John_Heard
Re: You and your ride... Post it here get to know everyone..
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: You and your ride... Post it here get to know everyone..
My 69' Camaro, all orignal except engine LT1 350, 350 turbo trans on column, 3.55 rear . 63, 330 actual miles, 2 1/2" x pipe Flow master exhaust system. Can't get pic to show say's file is to big ,Sorry!
Re: You and your ride... Post it here get to know everyone..
Sounds like a sweet ride :)joe69Z wrote:My 69' Camaro, all orignal except engine LT1 350, 350 turbo trans on column, 3.55 rear . 63, 330 actual miles, 2 1/2" x pipe Flow master exhaust system. Can't get pic to show say's file is to big ,Sorry!
A lot of folks use PhotoBucket to host pictures, and then just embed the link here. Works pretty well.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
-
- Posts: 74
- Joined: Sun Dec 19, 2010 5:24 pm
- Location: Ogden, Utah
Re: You and your ride... Post it here get to know everyone..
Sweet Monza Joe!
Re: You and your ride... Post it here get to know everyone..
hi all im Roger and i live in the UK i drive a 1986 mk3 laser ford capri it started off life as a road going 2.0 ohc and now runs a 3.5 rover lump and at present im building a 4.0 rover for it
i live in a place called attleborough in norfolk east anglia on the east coast of England the nearest drag strip to me is Santapod which is about 100 miles away
i have a wife and a total of 9 kids, 3 in london by previous relationships
i race as and when i can and run in the osfdc which holds about 7 meets a year
i live in a place called attleborough in norfolk east anglia on the east coast of England the nearest drag strip to me is Santapod which is about 100 miles away
i have a wife and a total of 9 kids, 3 in london by previous relationships
i race as and when i can and run in the osfdc which holds about 7 meets a year
Re: You and your ride... Post it here get to know everyone..
Glad to see someone from across the pond. Welcome to the dragstuff team! I have one of those rover lumps under some sheet metal as well...
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Re: You and your ride... Post it here get to know everyone..
Yep, the go-fast disease is truly international !!! Welcome to Dragstuff, nice ride :)
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: You and your ride... Post it here get to know everyone..
Heres my new purchase/project.Been wanting one for a very long time,now the fun begins.
34K original mile 66 Belair,283/glide combo (for now) until I either find a bigblock to build or a big cube small block to disquise.Ive always liked the "sleeper" appeal and these car scream sleeper.
flipped white walls around
rear lowered,15x8 steelies in the rear,275/60/15,waiting on frt 15x6 to arrive with frt disc conversionand more lowering.
34K original mile 66 Belair,283/glide combo (for now) until I either find a bigblock to build or a big cube small block to disquise.Ive always liked the "sleeper" appeal and these car scream sleeper.
flipped white walls around
rear lowered,15x8 steelies in the rear,275/60/15,waiting on frt 15x6 to arrive with frt disc conversionand more lowering.
1980 Camaro
1966 Belair
2003 Mach1
2004 Dodge Ram on 42" tires.
1966 Belair
2003 Mach1
2004 Dodge Ram on 42" tires.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: You and your ride... Post it here get to know everyone..
Cool, nice ride.
My 1971 X275 Nova | Facebook
Re: You and your ride... Post it here get to know everyone..
Now sporting frt disc brake conversion,lowered in the frt,and also 15x6 steelies with 215/70.Needs a big inch sb now or a bigblock.
1980 Camaro
1966 Belair
2003 Mach1
2004 Dodge Ram on 42" tires.
1966 Belair
2003 Mach1
2004 Dodge Ram on 42" tires.
-
- Posts: 2
- Joined: Wed Jun 06, 2012 6:46 pm
Re: You and your ride... Post it here get to know everyone..
Hey all. I'm neal. I've crewed on a lot of cars over the years, including
Jack Ostrander's toys, but after a few years off, ii decided it was time to build my own.
This is a very rough 66 Chevy II. It will be getting the frontclip treatment,
coilovers on the rear. New tin and a body job. Powerplant plan is a 500 horse 350on pumpgas
through a glide with a 3800 converter.
Lots ahead so i best get bqck out there. good to meet everyone.
Pics will have to come later. They won't post from my phone.
Jack Ostrander's toys, but after a few years off, ii decided it was time to build my own.
This is a very rough 66 Chevy II. It will be getting the frontclip treatment,
coilovers on the rear. New tin and a body job. Powerplant plan is a 500 horse 350on pumpgas
through a glide with a 3800 converter.
Lots ahead so i best get bqck out there. good to meet everyone.
Pics will have to come later. They won't post from my phone.
Re: You and your ride... Post it here get to know everyone..
Great forum, John you are a great help on here. My name's Mike Colemire, I run a Spitzer 4 link dragster with a 582 BBC, injected on alky. It's been 4.50's in the 1/8. Next season I plan on building a 540, 8-71, with injection. I want to run some quick 8's and a pro outlaw series we have now. If my eng sells after the season is over, I'll start pecking away to make it happen. Always wanted to have a blown big block, and since I'm not getting any younger I'd better do it, no matter how long it takes. Looks like there is alot of good people on here, glad to be a part of this. I'm not good at posting pic's, but if you've seen one pipe rack, well you get the picture. One of these days I'd like to have a nice dr car.
Re: You and your ride... Post it here get to know everyone..
Hey guy !! Weclome to the group :)vht wrote:Great forum, John you are a great help on here. My name's Mike Colemire, I run a Spitzer 4 link dragster with a 582 BBC, injected on alky. It's been 4.50's in the 1/8. Next season I plan on building a 540, 8-71, with injection. I want to run some quick 8's and a pro outlaw series we have now. If my eng sells after the season is over, I'll start pecking away to make it happen. Always wanted to have a blown big block, and since I'm not getting any younger I'd better do it, no matter how long it takes. Looks like there is alot of good people on here, glad to be a part of this. I'm not good at posting pic's, but if you've seen one pipe rack, well you get the picture. One of these days I'd like to have a nice dr car.
Mines a small BBC blower build with a couple of 750 holleys. I'm been thinking about injection but haven't done anything with it yet. Are you looking at running EFI or mechanical on your new build ?
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: You and your ride... Post it here get to know everyone..
Mech injection, I've run a Ron's Toilet forever, and this season I switched to a 2100 cfm terminator. After inj I'd never go back to a carb. I'm thinking, bird catcher on the next one, how's your combo run?
Re: You and your ride... Post it here get to know everyone..
2100 cfm, wow !vht wrote:Mech injection, I've run a Ron's Toilet forever, and this season I switched to a 2100 cfm terminator. After inj I'd never go back to a carb. I'm thinking, bird catcher on the next one, how's your combo run?
Don't think I'd be able to run mechanical injection on the street - I don't think I'm smart enough to keep it tweaked.
My combo seems to do really well but it's pretty simple - out of the box Dart 310s, fairly lumpy mechanical roller, Weiand 671 at about 13% overdrive - 2 x 750 4150 HP boost referenced carbs... drives like grandma's sedan on the street pretty much - well behaved but pretty responsive overall. Have had to make some compromises between street and track use but I'm pretty happy with it.
The biggest problem I have is wanting to go faster. It's a disease.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Who is online
Users browsing this forum: No registered users and 6 guests