Carnivore Performance and Nitrousaurus-X

Bench Racing - Misc. Discussions

Moderator: John_Heard

Post Reply
Message
Author
User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Carnivore Performance and Nitrousaurus-X

#1 Post by Craig W. » Mon Jan 03, 2011 10:34 am

I am in the middle of taking over the operation of Carnivore Performance, which is the company that manufactures the Nitrousaurus-X nitrous bottle pressure management unit. For those not familiar with it, it capable of heating, cooling, insulating and functioning as the bottle mount. Is compatible with 12v and 16v systems and only draws 5 amp so that its perfect for use in the car. http://www.gotsqueeze.com

Carnivore hit on some hard times over the past couple of years after a successful launch about four years ago. Being a small, father/son company, the recession took its toll. So they've turned the reigns over to me and I hope to make something of it.

I'm looking for few well respected nitrous racers in a certain areas to partner with to get the word out again. This would need to be someone who will use the unit in the car and/or pits, talk to other racers about the product, be visible at many races in the region and help sell the units on a commission basis. The racers chosen would receive a free unit at minimum. Other details will be discussed offline.

Thanks.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
supernova
Posts: 2552
Joined: Sat Feb 02, 2008 7:35 pm
Location: Ft.Worth Tx

Re: Carnivore Performance and Nitrousaurus-X

#2 Post by supernova » Mon Jan 03, 2011 11:03 am

Hey Craig,
I would be willing to talk to you about it.
Blackhoodmafia!!!! :mrgreen: :mrgreen:

1972 Nova SS
572 C.I. BBC

Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Carnivore Performance and Nitrousaurus-X

#3 Post by Craig W. » Mon Jan 03, 2011 11:10 am

Great! Drop me an e-mail at craig@2quicknovas.com please.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
ytnova
Posts: 735
Joined: Fri Oct 28, 2005 9:21 am
Location: orlando, florida/ under a hood
Contact:

Re: Carnivore Performance and Nitrousaurus-X

#4 Post by ytnova » Mon Jan 03, 2011 2:16 pm

Craig, I would be interested in promoting the product down here.
I am not really sure what the question is, but I am pretty sure the answer is Big Block.

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Carnivore Performance and Nitrousaurus-X

#5 Post by Craig W. » Mon Jan 03, 2011 3:18 pm

Ok, let's talk. E-mail me at craig@2quicknovas.com.

Thanks.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
chpcamaro
Posts: 773
Joined: Sun Nov 09, 2008 1:28 am
Location: socali

Re: Carnivore Performance and Nitrousaurus-X

#6 Post by chpcamaro » Mon Jan 03, 2011 8:50 pm

hey craig
well i would be more then willing to help you out. we could talk about me selling your product at my shop.
i deal with alot of the guys from psca so i could introduce them to your stuff if it would benifit them it might be profitable for both of us. but we can talk and i would like to hear more about the product
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Carnivore Performance and Nitrousaurus-X

#7 Post by Craig W. » Mon Jan 03, 2011 10:21 pm

That sounds like it has a lot of possibilities Rob. I'd like to get a presence in the major heads-up associations like PSCA. Send me your e-mail address and I'll send you some details.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

ERV JR
Posts: 293
Joined: Mon Jun 25, 2007 5:03 pm

Re: Carnivore Performance and Nitrousaurus-X

#8 Post by ERV JR » Thu Jan 06, 2011 10:03 pm

Craig W. wrote:That sounds like it has a lot of possibilities Rob. I'd like to get a presence in the major heads-up associations like PSCA. Send me your e-mail address and I'll send you some details.
Craig I can see what I can do with Wchra

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Carnivore Performance and Nitrousaurus-X

#9 Post by Craig W. » Fri Jan 07, 2011 7:14 am

E-mail me at craig@2quicknovas.com and we'll talk. Thanks.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Carnivore Performance and Nitrousaurus-X

#10 Post by Craig W. » Sun Jan 16, 2011 1:35 pm

OK guys, here's the new pricing. Retail used to be $350. I'm dropping that to $250 to get this product rolling again. I've got plenty of stock of red, blue, gray and orange. I've also got limited stock on green, purple, yellow and black. Shipping not included.

I can be reached at craig@2quicknovas.com or 270-634-3345 if you want to place an order or get more info.

Thanks.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

Post Reply

Who is online

Users browsing this forum: No registered users and 148 guests