Hello everyone.I am starting to build a 70 NovaStreet/Strip car to Bracket race.My goal is to run mid 11's or more.Heres what I have and plan to do.Let me know if you think my goal is realistic.
454,9.5 to 1,Iron Oval port Merlins, 2.19in &1.88ex Valves
Edelbrock Performer RPM Air Gap, 750 Mighty Demon Carb
Comp 288 Mech. Roller Cam: Duration at 050 inch Lift 246 In & Ex,Advertised 288 Duration,Lift 2.88 In @ Ex
Lobe Separation 110
Harland Sharp 1.7 Roller Rockers,Moroso pan.Msd Ign. w/digital 6 plus,Hooker Super Comp 1 7/8 Headers,
B.G. Enduro Fuel Pump and Regulator
Turbo 400, A-1 3000 stall converter
12 bolt w/4.10's
Koni SPA1 front shocks,Moroso trick springs,CalTracs,Rancho Shocks,28x9 ET Drags(255/60 on street)
Steel Cowl hood and flex fan to start with.
6 point Roll Bar,Weld in Connectors,Poly Seats, Fuel cell
Heater,wiper,rear seat and inner fender deleted
Thats all I can think of for now.Lets hear what you guys it will run and any other opinions. Thanks alot
What do you guys think?
Moderator: John_Heard
- LILBlueS10
- Posts: 12
- Joined: Mon Feb 06, 2012 1:10 pm
Re: What do you guys think?
I see no reason why you shouldn't be at least in the hi 10's with that set up. Depending on car weight and proper engine and chassis tuning that combo would easily run some hi 9's or low 10's. Also in my opinion you may wanna go with a larger carb as well.
- Bruce69Camaro
- Posts: 1799
- Joined: Thu Jul 23, 2009 11:07 am
- Location: PA
Re: What do you guys think?
Here are my thoughts, First, I think your goals are easliy within reach, Second, I also think you might need to go bigger on the carb.
The only other thing I question is the stall speed, but I'm not someone you should asked about that, I let the pro's make that call.
The only other thing I question is the stall speed, but I'm not someone you should asked about that, I let the pro's make that call.
Those who think they know it all have no way of finding out they don't.........
Re: What do you guys think?
I would think you need a 950 holley. (about 850 real world cfm). And a tad higher stall. And it wil see some solid 10's if its not a total tank, and has some good suspension.
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Re: What do you guys think?
I would try to get some aluminum heads for the weight loss ( not that you really need them) its about 70lbs off the nose,also bump up the compression a bit if you get the alum heads. X3 on the carb/converter. I had good results with Hooker Comp 2" headers on my 454 FWIW
Who is online
Users browsing this forum: Majestic-12 [Bot] and 12 guests