Dash fabrication
Moderator: John_Heard
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Dash fabrication
My brother in law runs a scrap yard, yes it's sad to see all that aluminum that could be used to make stuff with get melted down.
My 1971 X275 Nova | Facebook
Re: Dash fabrication
Can I come over to your house and play ? You have a *lot* more toys than I do...pro70z28 wrote:I could throw some gussets on there.![]()
![]()
It's stuff I found on the salvage side of the local steel supplier, so I have to use what's available. Sadly the pickins are slim these days. The yard is usually full of steel, SS & aluminum that can be bought by the Lb. But not Ann E. Moore.
![:smt003](./images/smilies/003.gif)
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: Dash fabrication
wikd69 wrote:Can I come over to your house and play ? You have a *lot* more toys than I do...pro70z28 wrote:I could throw some gussets on there.![]()
![]()
It's stuff I found on the salvage side of the local steel supplier, so I have to use what's available. Sadly the pickins are slim these days. The yard is usually full of steel, SS & aluminum that can be bought by the Lb. But not Ann E. Moore.
sure
Re: Dash fabrication
Cool beans :)pro70z28 wrote:surewikd69 wrote:
Can I come over to your house and play ? You have a *lot* more toys than I do...
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: Dash fabrication
Got a little more done on the English wheel yesterday. A guy I talked to on the phone that builds E-Wheels said if I build one it needs to be very sturdy & needs a lot of adjustment built in. So, this is what I came up with for the top anvil. It's a little more complicated than it needs to be, but I had a couple old air actuated hydraulic cylinders laying around that I wanted to make use of. I got them for free probably about 30 years ago and finally decided it's time to use what's left of them. I found one of the cylinder housings was corroded through but the ram was still good & that's what I needed for the anvil adjuster. Too bad they are shot, the cylinders are all aluminum (except for the ram).
Anyway here's the deal. I cut a couple sleeves out of aluminum round stock for the rams.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramsupportscut.jpg)
Cut a couple supports for the sleeves on the CNC
![Image](http://img.photobucket.com/albums/v205/pro70z28/RamsupportsCNC.jpg)
Parts pressed together. I didn't want the anvil assembly to rely on threads cut in aluminum, so I made this little pocket to hold a nut for the 3/4" ready rod that will be the adjusting screw.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramsupportpressedtogether.jpg)
Turning part of the ready rod down to 5/8'' to make an adjuster out of it.
![Image](http://img.photobucket.com/albums/v205/pro70z28/TurningReadyRod.jpg)
Anyway here's the deal. I cut a couple sleeves out of aluminum round stock for the rams.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramsupportscut.jpg)
Cut a couple supports for the sleeves on the CNC
![Image](http://img.photobucket.com/albums/v205/pro70z28/RamsupportsCNC.jpg)
Parts pressed together. I didn't want the anvil assembly to rely on threads cut in aluminum, so I made this little pocket to hold a nut for the 3/4" ready rod that will be the adjusting screw.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramsupportpressedtogether.jpg)
Turning part of the ready rod down to 5/8'' to make an adjuster out of it.
![Image](http://img.photobucket.com/albums/v205/pro70z28/TurningReadyRod.jpg)
Re: Dash fabrication
Here's where it's at so far. I have those cylinder rams cut to length. Turned a hub for the adjusting wheel that will be mounted on top. There will be a plate where the brass bushings are to tie the assembly together. Got a wheel and mounting flanges to make yet and the top anvil part of the project will be done.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramscuttosize.jpg)
I found some aluminum at the salvage yard that just said "I want to be an English wheel". I am building it to fit in the receiver I have on the wall for the other attachments. So, aluminum will make it a bunch lighter when I attach it to the wall to use. Old guys have to consider these things ya' know.
Had some time to kill his afternoon so I drew up & cut out the adjuster wheel for the E-Wheel.
Cut the hand grips out of 1/2" PVC.
![Image](http://img.photobucket.com/albums/v205/pro70z28/EWheel1.jpg)
1/4" aluminum for the wheel itself.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ewheel2.jpg)
Used fusor auto body panel adhesive to glue it all together.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ewheel3.jpg)
Like Norm Abram says ''I'll let it cook in the clamps overnight''.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ewheel4.jpg)
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramscuttosize.jpg)
I found some aluminum at the salvage yard that just said "I want to be an English wheel". I am building it to fit in the receiver I have on the wall for the other attachments. So, aluminum will make it a bunch lighter when I attach it to the wall to use. Old guys have to consider these things ya' know.
Had some time to kill his afternoon so I drew up & cut out the adjuster wheel for the E-Wheel.
Cut the hand grips out of 1/2" PVC.
![Image](http://img.photobucket.com/albums/v205/pro70z28/EWheel1.jpg)
1/4" aluminum for the wheel itself.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ewheel2.jpg)
Used fusor auto body panel adhesive to glue it all together.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ewheel3.jpg)
Like Norm Abram says ''I'll let it cook in the clamps overnight''.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ewheel4.jpg)
Re: Dash fabrication
Got a little more done tonight.
Cutting out the backing plate. The slots are to index the backing plate to the adjuster assembly.
![Image](http://img.photobucket.com/albums/v205/pro70z28/E-Wheelbackingplate.jpg)
Cutting out the top cap that connects the ready rod to the rams.
![Image](http://img.photobucket.com/albums/v205/pro70z28/RamcapEwheel.jpg)
Top cap completed. The brass thrust bushings are pressed in from the top and bottom. They come about .020 short of touching each other. This allows grease to be pumped in from the grease fitting.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramcapfinished.jpg)
Assembly is pretty close to done. This shows the index slots that align the backing plate to the assembly.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Topwheeladjustmentassembly.jpg)
I also added a grease fitting to each ram cylinder just to keep everything workin' smooth.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Topwheeladjustmentassembly2.jpg)
Cutting out the backing plate. The slots are to index the backing plate to the adjuster assembly.
![Image](http://img.photobucket.com/albums/v205/pro70z28/E-Wheelbackingplate.jpg)
Cutting out the top cap that connects the ready rod to the rams.
![Image](http://img.photobucket.com/albums/v205/pro70z28/RamcapEwheel.jpg)
Top cap completed. The brass thrust bushings are pressed in from the top and bottom. They come about .020 short of touching each other. This allows grease to be pumped in from the grease fitting.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Ramcapfinished.jpg)
Assembly is pretty close to done. This shows the index slots that align the backing plate to the assembly.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Topwheeladjustmentassembly.jpg)
I also added a grease fitting to each ram cylinder just to keep everything workin' smooth.
![Image](http://img.photobucket.com/albums/v205/pro70z28/Topwheeladjustmentassembly2.jpg)
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Dash fabrication
You're having too much fun there... Looks real nice!
My 1971 X275 Nova | Facebook
Re: Dash fabrication
I think that may be to pretty to use. ![Shocked :shock:](./images/smilies/icon_eek.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: Dash fabrication
I don't know what that is...but i am darn impressed with the workmanship. and hey, it's got a wheel on it, thats super cool right there
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Re: Dash fabrication
spaz109. It'll be an English wheel someday. Got a little more done last night. Parts for the top anvil.
vegaracer, I hope I get to use it on the "Z" one of these days. I'll be sure to keep it clean.
![Image](http://img.photobucket.com/albums/v205/pro70z28/TopAnvilYoke.jpg)
vegaracer, I hope I get to use it on the "Z" one of these days. I'll be sure to keep it clean.
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Image](http://img.photobucket.com/albums/v205/pro70z28/TopAnvilYoke.jpg)
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: Dash fabrication
Gotcha
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Re: Dash fabrication
All that I see in this guy is "Look at all of the cool tools that I have" Show-off. Your car would probably be finished if you did not spend 3 hours per day taking pics and posting them here. Back to work!
Who is online
Users browsing this forum: Google [Bot] and 106 guests