Firewall Project

Fabrication, Welding, Shop Tools, Tips & Techniques

Moderator: John_Heard

Message
Author
pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#31 Post by pro70z28 » Mon Nov 09, 2009 12:40 pm

I have a couple junk pneumatic cylinders (used some of the parts for the English Wheel) that just happen to be 4" I.D. aluminum. I made sleeves out of them to slip over the 4" O.D. tube. So the joints are pretty beefy. We'll see what happens. :?:
Image

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: Firewall Project

#32 Post by wikd69 » Mon Nov 09, 2009 1:10 pm

vegaracer wrote:
pro70z28 wrote:[Image.
I have a friend with a twin turbo car done the same way. No problems yet.
Perfect :mrgreen:

Man, I can't wait to see this beast come alive.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#33 Post by pro70z28 » Sun Apr 18, 2010 7:22 pm

Dusting the thread off. I had a little time yesterday to work on the "Z". I straightened up a couple places on the firewall so I'd have a straight clean edge to start rebuilding. Then I made one of the two wells the intercooler tubes will pass through. I might use this one or I may try another approach. I'd like the mating surface to be a little smoother than this one. [shrinker sorta' wrinkled it a little]. This is my first attempt at any ''real'' metal shaping so there may be a few trial & error attempts on this deal.


Image

Image
Image

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#34 Post by pro70z28 » Sun May 09, 2010 7:51 pm

I changed up the design of the firewall some. The change affected the shape of the intercooler flange wells. I decided to stamp the parts, I guess mainly because I wanted to give stamping a try.
I cut dies out of 3/4" MDF board & stamped the sheet metal on the press.

Image

then I rough trimmed the parts.

Image

cleaned them up

Image

Welded the front & back halves together

Image

Once I had the tube flanges where I wanted them I welded them together.

Image
Image

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#35 Post by pro70z28 » Sun May 09, 2010 7:52 pm

Sorry I got carried away on the project & by the time I remembered to take pictures I had the outlet tube firewall sheet metal done.
This is the firewall before...

Image

and with the intercooler tubes part of the sheet metal in place.

Image

Image

The inlet side is just a simple pie plate deal that will be trimmed & welded into the firewall eventually.
The outlet side was a little more complicated. I didn't want to run the plumbing off to the side (the way it's usually done). I wanted the carb hat facing straight back. Also, the engine is set back about 4" from the stock location. So, the 4" inlet tube has about 3/8" clearance between the windshield and about 1" clearance for the distributor. It's all pretty close but it fits. . The "through the firewall sheet metal'' for the inlet tube ended up looking sorta like shoving the flange through a hefty hefty trash bag. :D

...and here's what it looks like from "the office".

Image
Image

User avatar
vegaracer
Posts: 676
Joined: Mon Aug 20, 2007 1:12 pm
Location: Wyoming, Ontario, CANADA

Re: Firewall Project

#36 Post by vegaracer » Sun May 09, 2010 8:07 pm

Work looks real nice, but you're windshield's cracked. cheesygrin:
Feenstra's Towing

1973 Vega
434 SBC, N.A.
Powerglide
9.01 @ 146

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#37 Post by pro70z28 » Sun May 09, 2010 8:10 pm

:lol: I'm thinkin' of gettin' one of those windshield repair guys to come down & fix them cracks. :lol:
Image

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#38 Post by pro70z28 » Tue May 11, 2010 8:03 am

Forgot I took some shots of the process when I stamped the shallower inlet side.

I cut the 3/4" MDF out on the CNC. I gave one side 1/8" clearance for the metal and the other side the circle press fit into the MDF.

Image

Image

This made the die the right depth (I needed it to be stamped 1/2" deep for the right offset). It also made it easy to register the die halves.

Image

Once out of the press all I had to do was hammer the tucks and it's ready to trim to the firewall. The firewall that doesn't exist yet.
Image

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#39 Post by pro70z28 » Mon May 31, 2010 8:01 pm

Got a little more done on the firewall this weekend between honey -do projects.

I made a hammer form out of a 2x4 on the band saw to match the contour of the firewall and beat some metal into submission. Still needs a little hammering but it's close enough for a test fit.

Image


Image

I decided to do recessed panels on the sides & I think I'll do raised panels on the front, but I've changes my mind so many times already, who knows.

Image

Image

This part of the firewall will get welded to the body. The rest will get welded to the chassis and the 2 will be bolted or riveted together (blind seam) from the inside

Image

I think I spent more time in the lawn chair thinkin' about this than actually working on it. I kept changing the plans until I had a headache & finally decided to just do something. If it doesn't work I'll start over. I want to be able to take the body off, so that's why it's going to be a 2 pc. deal. Sort of the same reason I spent all that time on the billet aluminum hinges rather than just welding them to the chassis. Keeping the "A" pillars I'll still be able to use stock door weatherstripping and boxing in the firewall under the windshield I'll be able to keep the stock windshield wipers, got to keep it street legal right?
Image

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: Firewall Project

#40 Post by John_Heard » Mon May 31, 2010 8:25 pm

Looks good - how did you make the depression in the side panel? Looks like maybe it was bead rolled?

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#41 Post by pro70z28 » Mon May 31, 2010 8:28 pm

Thanks John. Yup, I used a bead roller with a step die.
Image

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: Firewall Project

#42 Post by John_Heard » Mon May 31, 2010 8:45 pm

How do you get the inside (area not covered by the bead roll) to be at the same height? I've got a bead roller but have never played with those dies

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#43 Post by pro70z28 » Mon May 31, 2010 9:09 pm

The step die just puts an offset in the metal _/- If you make a complete lap on the metal it raises (or lowers) everything inside the shape. I don't know if that makes sense :shock:

I just grabbed some scrap and experimented
Image

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: Firewall Project

#44 Post by John_Heard » Mon May 31, 2010 10:45 pm

Thanks... I'll try that.

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: Firewall Project

#45 Post by pro70z28 » Sun Jun 06, 2010 6:59 pm

Got a little more done on the firewall this weekend, Welded a few of the small pieces to some of the medium sized pieces.

Image

Image
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests