Please take a minute to welcome Randy McMahon, owner of RPM Performance as our new Data Logging Forum Guru.
Randy has quite a history in the performance industry, he's been working with data acquisition computers since 1981 and has been specializing in racing electronics since 1992.
He's been addicted to racing since 1969 when he got his first car. Since his company was started in '92, he has worked as crew on Fuel Funny Cars, Fuel Dragster, several alcohol and Comp cars. Although the responsibilities of running a business prevents him from full time racing, he and his partners run two Top Sportsman cars and an Altered.
With a background of reading and interpreting data acquisition graphs for over 20 years, Randy says he's on better "speaking terms" with squiggly lines than most people . As you can expect, for someone that has been designing and selling racing data loggers for 12 years, he's read and analyzed a ton of graphs from everything from weekend bracket cars to Top Fuel.
Randy's a real good guy and has been very helpful to me getting my logger setup, I think he's going to be a great asset to the members of this board and we're all going to learn a lot from his shared knowledge.
Welcome aboard Randy!!
PS: Don't expect replies immediately from Randy, he does have a business to run and is doing this in his spare time...
John Heard
Welcome Randy McMahon our new Data Logging Guru
Moderator: RPM
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Hey Randy,
Welcome to the board, thanks for spending some time with us flunkies helping us with our programs. we appreciate it a bunch.
I just checked out your site & had a quick question. I see you have a 50 Lb Pressure X-Ducer available (DP50 0 - 50 PSI Sensor $98.00). is that one of the newer electronic flavors that have 3 wires on it. you input 5 Vdc into it, & get a .5 to 4.5 Vdc linear output (& a ground)?
thanks a bunch.
Bob
Welcome to the board, thanks for spending some time with us flunkies helping us with our programs. we appreciate it a bunch.
I just checked out your site & had a quick question. I see you have a 50 Lb Pressure X-Ducer available (DP50 0 - 50 PSI Sensor $98.00). is that one of the newer electronic flavors that have 3 wires on it. you input 5 Vdc into it, & get a .5 to 4.5 Vdc linear output (& a ground)?
thanks a bunch.
Bob
Pressure sensors
Hi Bob,
You are correct, three wire, 5 volt power, .5 to 4.5 volt output and ground. This type sensor is available in pressure ranges from 15 PSI to 10,000 PSI. Depending on your application, they can also come in 12 volt power configurations.
Regards,
Randy
You are correct, three wire, 5 volt power, .5 to 4.5 volt output and ground. This type sensor is available in pressure ranges from 15 PSI to 10,000 PSI. Depending on your application, they can also come in 12 volt power configurations.
Regards,
Randy
Who is online
Users browsing this forum: No registered users and 7 guests