Running a 6-71 with two holley carburetors what can I run to help with tuning
Would like to run 2 sensors but would one be good for starters
What brand etc
Where on the collectors should I run this
wide band with a 6-71
Moderator: RPM
wide band with a 6-71
Street car Old motor 10.80 @122 1.49 60' 355 6-71 stock gm heads stock rocker arms block hugger headers 1-5/8"x2.5" collector
the car ran in the 9's in the 60's with an olds motor.
the car ran in the 9's in the 60's with an olds motor.
Re: wide band with a 6-71
This is what I did on mine - the bungs are on the side of the collectors. I've not done anything beyond this yet, so it'll be interesting to see what you come up with here.prostude wrote:Running a 6-71 with two holley carburetors what can I run to help with tuning
Would like to run 2 sensors but would one be good for starters
What brand etc
Where on the collectors should I run this
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
- CDR Performance
- Posts: 147
- Joined: Tue Mar 02, 2010 7:41 pm
- Location: Indianapolis, Indiana
Re: wide band with a 6-71
Innovate, FAST, PLX Devices, all work well.
Some data log some don't.
PLX is a little ricy but work well and can can modules and data logger.
http://www.plxdevices.com/imfd.html
Some data log some don't.
PLX is a little ricy but work well and can can modules and data logger.
http://www.plxdevices.com/imfd.html
CDR PERFORMANCE
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
Re: wide band with a 6-71
Wow that plxsetup looks really nice but probably out of my price range
At this point I think i am looking for something that I can run and retrieve info after a pass
Would I be ok to just run one for starters on one header I figured that would be better than nothing
At this point I think i am looking for something that I can run and retrieve info after a pass
Would I be ok to just run one for starters on one header I figured that would be better than nothing
Street car Old motor 10.80 @122 1.49 60' 355 6-71 stock gm heads stock rocker arms block hugger headers 1-5/8"x2.5" collector
the car ran in the 9's in the 60's with an olds motor.
the car ran in the 9's in the 60's with an olds motor.
Re: wide band with a 6-71
I know they make a OBD II Bluetooth wireless connection that can send a signal to your iphone or Android phone.
Is there anyone out there developing a way to hook up this technology to a non obd II car
another words would it be possible in theory to to hook up a o2 sensor in a non computerized car then wire it to a obd II plug assembley then hook a Bluetooth adapter in which would in turn send the signal to your phone which would in turn have software that would display your air fule mixture,or is there a computer needed before the info ever hits the bluetooth.
just a thought since these bluetooth adapters to the phone seem to be very effective for an obd II CAR
Is there anyone out there developing a way to hook up this technology to a non obd II car
another words would it be possible in theory to to hook up a o2 sensor in a non computerized car then wire it to a obd II plug assembley then hook a Bluetooth adapter in which would in turn send the signal to your phone which would in turn have software that would display your air fule mixture,or is there a computer needed before the info ever hits the bluetooth.
just a thought since these bluetooth adapters to the phone seem to be very effective for an obd II CAR
Street car Old motor 10.80 @122 1.49 60' 355 6-71 stock gm heads stock rocker arms block hugger headers 1-5/8"x2.5" collector
the car ran in the 9's in the 60's with an olds motor.
the car ran in the 9's in the 60's with an olds motor.
Who is online
Users browsing this forum: No registered users and 2 guests